268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front driveshaft hub carrier: Removal - Refitting
31A
a Torque tighten:
- the shock absorber lower bolt (105 Nm),
- the lower ball joint nut (62 Nm),
- the track rod end nut (37 Nm),
- the front brake disc bolts (15 Nm),
- the front wheel driveshaft nut (280 Nm),
- the front brake calliper mounting bolts (105
Nm),
- the wheel bolts (130 Nm).
IMPORTANT
To avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
a Connect the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery).
a Adjust the axle assemblies (see 30A, General information,
Front axle: Adjustment values, page
30A-14) .
a When adjusting the axle assemblies, program the
steering wheel torque and angle sensor diagnostic
tool (see Fault finding - Replacement of components)
(MR 372, 36B, Power-assisted steering).
a Adjust the xenon headlights, if fitted to the vehicle
(see Xenon headlights: Adjustment) (MR 370,
80C, Xenon bulbs).
31A-14