268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front driveshaft hub carrier: Removal - Refitting
31A
Essential special tooling
Rou. 604-01
Tav. 476
Sus. 1731
Hub locking tool.
Ball joint extractor.
Front shock absorber removal
tool.
Essential equipment
diagnostic tool
Tightening torquesm
shock absorber lower
bolt
105 Nm
lower ball joint nut
62 Nm
track rod end nut
front brake disc bolts
front wheel driveshaft
nut
front brake calliper
mounting bolts
37 Nm
15 Nm
280 Nm
105 Nm
a Remove:
- the front brake calliper mounting bolts (1) .
- the track rod end nut (2) ,
- the lower ball joint nut (3) ,
- the lower bolt (4) from the shock absorber.
101215
wheel bolts
130 Nm
REMOVAL
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 370, 02A, Lifting equipment).
a Disconnect the battery (see Battery : Removal -
Refitting) (MR 370, 80A, Battery).
a Remove the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Unclip:
- the wheel speed sensor from the hub carrier,
- the xenon bulb sensor (if fitted to the vehicle).
31A-12