268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front brake pads: Removal - Refitting
31A
Essential special tooling
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Fre. 1190-01
Brake calliper piston return
tool.
Tightening torquesm
bolts of the calliper
guide pins
27 N.m
This procedure concerns TEVES type brake pads.
WARNING
In order not to damage the brake hose:
- do not tension the hose,
- do not twist the hose,
- check that there is no contact with the surrounding
components.
When replacing brake pads, it is essential to replace
the pads on the opposite side.
REMOVAL
127487
a Unclip the brake hose from the shock absorber.
a Remove the retaining spring (1) from the brake calliper
using a flat-blade screwdriver.
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
127486
a Remove:
- the caps (2) from the guide pin bolts,
- the calliper guide pin bolts (2) ,
- the calliper (3) from its support.
a Attach the calliper (3) to the shock absorber spring.
a Remove the brake pads.
31A-1