268954910-Renault-Scenic.pdf

ANTI-LOCK BRAKING SYSTEM
Brake hydraulic assembly: Removal - Refitting
38C
M9R, and LEFT-HAND DRIVE
a Remove:
- the hydraulic unit and support assembly,
- the bolts securing the support onto the hydraulic
unit,
- the hydraulic unit.
REFITTING
a Proceed in the reverse order to removal.
a
a Torque tighten:
106032
WARNING
Set up the earth terminal with the wires facing
downwards to optimise the hydraulic unit computer
connector sealing.
- the bolts mounting the hydraulic unit on its
support (8 Nm),
- the bolts mounting the pipes on the hydraulic
unit (17 Nm),
- the bolts for the hydraulic unit mounting on the
body (6.5 Nm).
a Bleed the brake circuit (see 30A, General information,
Brake circuit Bleeding, page 30A-2) .
a Connect the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery).
38C-21