268954910-Renault-Scenic.pdf

GENERAL INFORMATION
Rear axle: Adjusting
30A
Essential equipment
safety strap(s)
Tightening torquesm
mounting bolt joints
12.5 daNm
WARNING
Never use the rear axle as support for a lifting system.
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 370, 02A, Lifting equipment).
102521
Note:
- During this operation, strap the vehicle to the lift
using a safety strap(s), to avoid any imbalance.
-For the procedure to fit the safety strap(s)
(see Vehicle: Towing and lifting) (MR 370,
02A, Lifting equipment).
The operation is carried out with the shock absorber
lower mounting removed.
106178
a Adjust the height of the pads to obtain a centre-tocentre
distance between the shock absorber mounting
points (body mounting (1) , axle mounting (2) )
corresponding to a length of 402 mm.
a Torque tighten the mounting bolt joints (12.5
daNm).
30A-20