268954910-Renault-Scenic.pdf

ANTI-LOCK BRAKING SYSTEM
Brake hydraulic assembly: Removal - Refitting
38C
K4J
a Remove the ABS computer earth terminal mounting
bolt.
a Disconnect the computer connector.
a Undo the pipes from the hydraulic unit.
a Unclip the pipes from the hydraulic unit.
a Remove:
104341 106032
a
WARNING
Set up the earth terminal wires facing
downwards, to optimise the hydraulic unit computer
connector sealing.
- the mounting bolts (14) from the hydraulic unit support,
- the « hydraulic unit - support » assembly,
-the bolts securing the hydraulic unit on the support,
- the hydraulic unit.
AIR CONDITIONING or CLIMATE CONTROL
a Refit the air-conditioning hose (see Dehydration
canister - evaporator connecting pipe: Removal -
Refitting) (MR 370, 62A, Air conditioning).
REFITTING
a Proceed in the reverse order to removal.
a Torque tighten:
- the hydraulic unit support mounting bolts (6.5
Nm),
- the bolts mounting the pipes on the hydraulic
unit (14 Nm),
- the air distributor mounting bolts (9 Nm),
- the bolts mounting the hydraulic unit on its
support (8 Nm).
Note:
- Replace the seal every time the throttle valve is
removed,
- The seals at the ends of the air conditioning
pipe must be replaced.
38C-6