268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and RIGHT-HAND DRIVE
a Place a cloth under the hole (15) .
101739
a Remove the brake fluid reservoir pipe.
a Fit plugs into the openings.
a Remove the master cylinder return (16) from the
bulkhead by turning it clockwise a quarter of a turn
(bayonet type mounting) using the (Emb. 1797).
REFITTING
a Check the condition of the seals.
a Proceed in the reverse order to removal.
a Bleed the clutch control (see 37A, Mechanical
component controls, Clutch circuit: Bleeding,
page 37A-73) .
a Check that the clutch system is operating correctly.
a Connect the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery).
37A-72