268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and RIGHT-HAND DRIVE
PK4
PK4
a Pull out clip (8) .
115169
a Remove:
- the engine undertray,
- the bleed plug (6) .
115170
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
a Unclip the pipe at (9) .
a Connect a transparent pipe to the bleed hole running
to an empty container placed under the bleed hole.
a Turn the end (7) of the slave cylinder anticlockwise
as far as it will go.
a Depress the pedal using your hand (to drain the
master cylinder and the pipe).
a Place a cloth under the master cylinder.
101739
a Remove the clip (10) from the union on the master
cylinder return.
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
a Take out the slave cylinder supply pipe.
37A-70