268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and RIGHT-HAND DRIVE
JH3 or JR5
ND0
101701
a Lift up clip (3) .
a Pull out the master cylinder control pipe by one
notch.
a Place a cloth under the bleed hole.
a Operate the pedal by hand to empty the master cylinder
and the pipe.
a Lift up clip (4) .
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
102513
a Apply pressure to the clip (5) manually, whilst pulling
on the pipe.
WARNING
Do not pull the clip. If it is incorrectly handled in
any way, the pipe will need to be replaced.
a Pull out the master cylinder control pipe by one
notch.
a Place a cloth under the bleed hole.
a Depress the pedal using your hand (to drain the
master cylinder and the pipe).
a Press the clip (5) .
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
37A-69