268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and LEFT-HAND DRIVE
REFITTING
PK4
a Check the condition of the seals.
a Proceed in the reverse order to removal.
a Bleed the clutch control (see 37A, Mechanical
component controls, Clutch circuit: Bleeding,
page 37A-73) .
a Check that the clutch system is operating correctly.
a Connect the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery).
a Lift up clip (11) .
115169
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
a Unclip the pipe at (12) .
a Place a cloth under the master cylinder.
101739
a Remove the clip (13) from the union on the master
cylinder return.
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
a Withdraw the slave cylinder supply pipe.
37A-67