268954910-Renault-Scenic.pdf
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MECHANICAL COMPONENT CONTROLS<br />
Clutch circuit: Removal - Refitting<br />
37A<br />
JH3 or JR5 or ND0 or PK4, and LEFT-HAND DRIVE<br />
REMOVAL<br />
a Position the vehicle on a two-post lift (see Vehicle:<br />
Towing and lifting) (MR 370, 02A, Lifting equipment).<br />
a Disconnect the battery (see Battery : Removal -<br />
Refitting) (MR 370, 80A, Battery).<br />
a Remove:<br />
- the engine cover,<br />
- the scuttle panel grille (see Scuttle panel grille:<br />
Removal - Refitting) (MR 371, 55A, Exterior protection).<br />
- the battery (see Battery : Removal - Refitting)<br />
(MR 370, 80A, Battery),<br />
- the battery tray with the injection computer,<br />
- the air filter box (see Air filter unit: Removal - Refitting)<br />
(MR 370, 12A, Fuel mixture).<br />
a Drain the brake fluid reservoir using a syringe until<br />
the level is below the master cylinder supply orifice.<br />
JH3 or JR5<br />
104343<br />
a Remove:<br />
- the two air filter access panel mounting bolts (1) ,<br />
- the air filter access panel,<br />
a Lift up clip (6) .<br />
101701<br />
- the scuttle panel partition mounting bolt (2) .<br />
a Pull out the master cylinder control pipe by one<br />
notch.<br />
a Place a cloth under the bleed hole.<br />
a Operate the pedal by hand to empty the master cylinder<br />
and the pipe.<br />
a Lift up clip (7) .<br />
a Disconnect the pipes from the slave cylinder.<br />
a Fit plugs into the openings.<br />
a Remove:<br />
104246<br />
- the scuttle panel partition mounting bolts (3) ,<br />
- the scuttle panel partition,<br />
37A-65