268954910-Renault-Scenic.pdf

GENERAL INFORMATION
Front axle: Adjusting
30A
steering wheel lock
Essential equipment
Tightening torquesm
wheel alignment adjustment
lock nuts
53 N.m
I - ADJUSTMENT PREPARATION STAGE
a
Note:
Throughout the axle assembly checking and
adjustment process:
- the Renault Card must remain in the reader,
- do not press the « START » button. 121364
a Check the geometry (see 30A, General information,
Axle assemblies: Check, page 30A-8) .
a Loosen the wheel alignment adjustment lock nut (1)
.
a Turn the track rod sleeve (2) to the required value.
II - ADJUSTMENT OPERATION
1 - Wheel alignment
a Set the wheels straight ahead.
a Lock the steering wheel using a steering wheel
lock.
a Adjust the wheel alignment by rotating the track rod
sleeves.
a After adjustment, torque tighten the wheel alignment
adjustment lock nuts (53 N.m).
2 - Castor angle
a Not adjustable.
3 - Camber
a Not adjustable.
4 - Pivot
a Not adjustable.
30A-16