268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch pedal: Removal - Refitting
37A
RIGHT-HAND DRIVE
JH3 or JR5
ND0
a Lift up the clip (3) .
a Pull out the clutch control pipe by one notch.
101701
102513
a Apply pressure to the clip (5) manually, whilst pulling
on the pipe.
a Place a cloth under the bleed port.
a Operate the pedal by hand to empty the master cylinder
and the pipes.
a Lift up the clip (4) .
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
WARNING
Do not pull the clip. If it is incorrectly handled in
any way, the pipe will need to be replaced.
a Pull out the pipes on the clutch control by one position.
a Place a cloth under the bleed port.
a Operate the pedal by hand to empty the master cylinder
and the pipes.
a Remove clip (5) .
a Disconnect the pipes from the slave cylinder.
a Fit plugs into the openings.
37A-62