268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch pedal: Removal - Refitting
37A
RIGHT-HAND DRIVE
Tightening torquesm
clutch pedal plate nuts
2.1 daNm
REMOVAL
a Disconnect the battery, starting with the negative
terminal.
Note:
The clutch master cylinder is mounted on the
clutch pedal assembly. Remove the « pedal -
master cylinder » assembly to extract the pedal
or master cylinder.
a Remove:
104246
a Drain the brake fluid reservoir until the level is below
the master cylinder supply port.
a Remove:
- the engine covers,
- the scuttle panel grill ( (see 85A, Wiping -
Washing) ).
- the radiator tank partition mounting bolts (3) ,
- the scuttle panel partition.
a Remove:
- the battery,
- the battery tray,
- the computer with its mounting,
- the air filter outlet duct.
a Drain the brake fluid reservoir until the level is below
the master cylinder supply port.
a Remove:
104343
- the two air filter access panel mounting bolts (1) ,
- the air filter access panel,
- the mounting bolt (2) from the scuttle panel partition.
37A-61