268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Gear control unit: Removal - Refitting
37A
AJ0
Tightening torquesm
automatic gearbox control
unit nuts
21 Nm
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Note:
It is essential that the passenger compartment
gear lever and the multifunction switch lever on
the gearbox are in D.
104343
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Move the gear lever to position D.
a Switch off the ignition.
a Remove:
- the central console (see Centre console: Removal
- Refitting) (57A, Interior equipment),
- the engine cover,
- the engine undertray bolts,
- the engine undertray.
- the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (55A, Exterior protection).
a Remove:
- the air filter access panel bolts (1) ,
- the air filter access panel (2) ,
104246
- the bolts (3) from the scoop under the scuttle panel
grille,
- the scoop under the scuttle panel grille (4) .
- the battery (see Battery : Removal - Refitting)
(80A, Battery)
- the battery tray (see Battery tray: Removal - Refitting)
(80A, Battery),
- the injection computer (see Diesel injection computer:
Removal - Refitting) (13B, Diesel injection),
- the air pipe at the air filter box outlet.
37A-55