268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch master cylinder: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and LEFT-HAND DRIVE
PK4
101740
a Remove:
- the engine undertray,
- the bleed plug (6) .
115170
a Place a cloth under the hole (8) .
a Disconnect the brake fluid reservoir pipe.
a Fit plugs into the openings.
a Place a cloth under the master cylinder.
a Turn the end (7) of the slave cylinder anticlockwise
as far as it will go.
a Connect a transparent pipe to the bleed hole running
to an empty container placed under the bleed hole.
a Place a cloth under the bleed hole.
a Remove the union clip from the master cylinder (9) .
a Disconnect the pipes.
a Fit plugs into the openings.
a Disconnect the master cylinder ball joint from the
clutch pedal in the passenger compartment.
a Depress the pedal using your hand (to drain the
master cylinder and the pipe).
19399
a Remove the master cylinder from the bulkhead in
the engine compartment by turning it a quarter turn
clockwise (bayonet type mounting) using the (Emb.
1797).
37A-49