268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Clutch master cylinder: Removal - Refitting
37A
JH3 or JR5 or ND0 or PK4, and RIGHT-HAND DRIVE
Essential special tooling
Emb. 1797
24 mm socket for removing
and refitting clutch master
cylinder
Tightening torquesm
clutch pedal plate nuts
21 Nm
REMOVAL
PK4
a Remove:
104246
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 370, 02A, Lifting equipment).
- the scuttle panel partition mounting bolts (3) ,
- the scuttle panel partition,
- the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery),
- the battery tray with the injection computer,
a Disconnect the battery (see Battery : Removal -
Refitting) (MR 370, 80A, Battery).
a Remove:
- the engine cover,
- the air filter box (see Air filter unit: Removal - Refitting)
(MR 370, 12A, Fuel mixture).
a Drain the brake fluid reservoir using a syringe until
the level is below the master cylinder supply orifice.
- the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (MR 371, 55A, Exterior protection).
104343
a Remove:
- the two air filter access panel mounting bolts (1) ,
- the air filter access panel,
- the scuttle panel partition mounting bolt (2) .
37A-43