268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
37A
WITHOUT AUTOMATIC PARKING BRAKE
REFITTING
a Follow the routing noted during removal.
a To refit, proceed in the reverse order of removal.
104530
a Pull the parking brake control cables out via the vehicle
underbody.
a Remember the routing for refitting.
a Unhook the parking brake control cables:
- from the callipers,
- from their guides.
104531
a Screw the adjusting nut to obtain a measurement (X)
of 17 mm.
a Tighten the adjusting nut so that the brake pads are
rubbing lightly against the brake discs.
a Check the parking brake lever stroke.
a Refit:
- the centre console,
- the centre console mountings,
- the centre console carpet.
a Torque tighten:
- the parking brake control lever mountings (0.8
daNm),
- the centre console mountings (0.2 daNm).
a Remove the parking brake control cables from the
rear axle.
a Remove the parking brake control cables.
104529
37A-34