268954910-Renault-Scenic.pdf

MECHANICAL COMPONENT CONTROLS
Master cylinder: Removal - Refitting
37A
F4R or F9Q or K4J or K4M or K9K or M9R
REFITTING
104087
a Disconnect the electrical connector (9) on the master
cylinder reservoir.
a Drain the master cylinder reservoir with a syringe.
a Remove:
- the clutch master cylinder pipe (10) ,
- the brake pipes (11) on the master cylinder,
- the master cylinder mounting nuts (12) on the brake
servo,
- the « master cylinder/master cylinder reservoir »
assembly,
a
101704
WARNING
The master cylinder seals (14) must be replaced.
a Clip the master cylinder reservoir onto the master
cylinder correctly.
a Refit the master cylinder reservoir mounting bolt on
the master cylinder.
a Torque tighten the master cylinder reservoir
mounting bolt (8.5 Nm).
- the master cylinder reservoir mounting bolt (13) on
the master cylinder,
- the master cylinder reservoir.
37A-3