268954910-Renault-Scenic.pdf

STEERING ASSEMBLY
Steering column: Removal - Refitting
36A
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Steering shaft yoke
bolt (13,04,01,07).
parts always to be replaced: Steering shaft yoke
nut (13,04,01,08).
parts always to be replaced: Steering wheel bolt
(13,04,01,09).
a
Note:
When replacing an NSK type steering column on
vehicles not equipped with ESP, do not remove
the steering wheel angle sensor located on the
new steering column.
115385
a When refitting, the steering column must stay in place
using the retainers (11) ,
a Push and pull on the electric power-assisted steering
computer power and signal connectors to check
that they are properly secured (risk of loss of assistance).
Note:
The steering wheel should enter the splines
freely (the splines have foolproofing devices).
Do not damage the foolproofing splines.
Note:
- Do not refit the housing.
-On a new steering column, the universal joint
cam nut is pre-fitted.
36A-12