268954910-Renault-Scenic.pdf

STEERING ASSEMBLY
Steering column: Removal - Refitting
36A
2 - NSK column
a
115386
a Rest the steering column on the shim.
115381
WARNING
The bolt for the electric steering column lock has
a left-hand thread. It unscrews in a clockwise
direction.
a Remove the column lock bolt (6) .
a Disconnect the column lock connector.
a Remove the column lock.
a Unclip the rotary switch wiring harness (7) from the
steering column.
Note:
Do not remove any power-assisted steering
column component.
a Fit a shim approximately 20cm thick on the floor under
the steering column in order to fit the column before
disconnecting the connections.
118665
a Remove:
- the steering column nuts,
- the steering column.
a Disconnect:
- the connector (8) by pressing (1) while pulling (2) ,
- the connector (9) .
WARNING
To ensure the electronic systems work properly,
do not damage the locking system (10) of the
connector (8) .
a Remove the steering column.
36A-11