268954910-Renault-Scenic.pdf

STEERING ASSEMBLY
Axial ball joint linkage: Removal - Refitting
36A
EQT LEVEL E3 PLUS or EQT LEVEL EA1 or EQT LEVEL EA2 or EQT LEVEL EA3 or EQT LEVEL EA4 or EQT
LEVEL EA5 or EQT LEVEL EA6 or EQT LEVEL EAG
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
101355
-a new washer (3) ,
- the axial ball joint (4) .
a Torque tighten the axial ball joint (80 N.m) using
the tool (Dir. 1305-01).
a Coat with SILICONE GREASE (see Vehicle: Parts
and ingredients for the repairwork) :
- the steering rack,
- the axial ball joint.
III - FINAL OPERATION
a Refit the steering box gaiter (see 36A, Steering assembly,
Steering rack gaiter: Removal - Refitting,
page 36A-15) .
a Refit the track rod (see 36A, Steering assembly,
Track rod: Removal - Refitting, page 36A-3) .
a Refit the wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Check the axle geometry (see 30A, General information,
Axle assemblies: Check, page 30A-8) .
a If necessary, adjust the geometry of the axle assemblies
(see 30A, General information, Front axle:
Adjusting, page 30A-16) .
36A-5