268954910-Renault-Scenic.pdf

WHEELS AND TYRES
Run flat tyres
35A
21589
a Mount the support up to the wheel stop by pushing
the roller and rotating the assembly. Make sure the
support is properly positioned against the wheel
stop, without damaging the pressure detector.
21592
a Position the roller to bear against the wheel rim.
a Mount the tyre's outer bead on the wheel rim seat.
21590
a Remove the tyre's inner bead from the wheel rim
groove using the lever.
21591
a Fit the tyre's inner bead in the same way as before.
a Make sure that the tyre is correctly fitted when inflating,
and then screw on the valve cap.
Note:
Always use a source of dry compressed air.
35A-24