Uncontrolled

Uncontrolled Copy

Contents
Assembly options
OM Series· HE 501/MIL
Page
4·5
6·7
Presented in this booklet is the range of D.Sub
connectors specifical for military and aerospace
equipment: OM, DMW, 8630 and 8635 series.
These connectors comply with the requirements of the
major international standards applicable in this area.
OM Series · HE 508
DMW Series
8630 Series· HE 501/MIL
Removable crimp contacts
8630 Series · HE 508
Norm/8630 Cross Reference list
8635 Series
Layouts
Shell dimensions
PCB drilling dimensions
Panel cut-out
Panel mounting
8-9
10-11
12
13
14
15
16
17
18
18
19
19
The OM and 8630 are NF.C. 93425 and HE 501
approved (European specification) and MIL-C.24308 C
Qualified (U-S-A-) depending on versions.
For particulary severe environments, the OM and 8630
series also exist in the HE 508 approved versions
(class 155°C).
These connectors are manufactured under CCQ
control (Central Quality Control) and are HE 5 or
MIL-QPL-Iisted.
They may be ordered directly, quoting the specification
part number. A cross reference table can be found
at the end of each series.
The DMW series meets HE 507 specification.
The 8635 series connectors constitue a range of high
performance connectors with a high density of crimp
contact (size 22) with standard shell sizes E, A, 8, C, D.
Some series (8630 - H E508 class and 8635) are also
available in sealed versions with different l.evels of
sealing.
Uncontrolled Copy
Finally, a range of various accessories (See Booklet
IV) and many assembly options of the industrial D.Sub
are available for the SOURIAU military series.
All dimensions in this
catalogue are in mm
3

.lisOURIAU
assembly options
The OM and 8630 series possess the same mechanical characteristics as the series for computer and industrial
applications: strength, contact scoop-proof protection from metal shell, polarizing trapezoid shape.
They accept most accessories which are supplied pre-fitted on connectors to suit the most varied applications.
Each assembly option corresponds to a letter added to the part number when ordering.
V: Female screw lock, riveted to shell. F: Float mounting (floating bushing).
r '----"0:..::5~1
; ... 2,2 + ~· 1 .. _,..L-- -------1
Thread
UNC 4,40
I I
....
6,03 maxi
S: Spacers, riveted shell (straight spills only). X: Dimples (for enhanced electrical continuity)
• on male connector only,
• standard on tin plated shell.
A +0,1
-0,05
0: Clinch nut UNC 4.40.
L: Clinch nut M3.
Uncontrolled Copy
I
H: Shielding termination fingers
• easier cable shield termination on connector shell
• braid termination by solder or lug terminal
• improve solder tensile length (the braid runs through the eye)
• prevents accidental temperature rise of the insulator which could affect performance
• for cord connector: solder buckets only; on tin plated shell.
3
,(
..
E
"' ~
4

assembly options
Souriau standard DM series connectors with angle spills are
supplied with brackets and contact retainer bar (one piece plastic
assembly)
C: Connector supplied without bracket.
Ter~
5, 8,
7
(US standard)
9 to 37
contacts
50
contacts
9 to 37
contacts
50
contacts
M: Connector supplied
with metal
brackets.
Layout 9±0.2
9 to 37
contacts
50
contacts
Uncontrolled Copy
14.8
17.4
A±0.2
15.30
17.90
13.20
15.70
G: Harpoon mounting of connector on PCB.
- No screws, no rivets
- Quick assembly
- Electrical continuity (through-plated holes)
- Angled spills available (9 to 37 contacts)
- For 1.6 to 1.8 thick PCBs (terminations 5, 7 and 8)
5

6
[Q)o~M[ID
DM series-HE 501
JisOURIAU
For aerospace, military or severe environment applications, series under
M I L-C.24308 C and N F C 93425 I HE 501.
European standard qualifications.
They are QPL listed and made under CCQ (HE 5 list).
®~ UL rated product - file E77927
ordering information
series
shell size
options
number of contacts
tennination type
and
plating
opfons
shell plating
E,A, B,C,D
M - characterization of OM series
D
BLANK - standard mounting hole (0 = 3.10)
0- clinch nut UNC 4.40
L - clinch nut M3
V - female screw lock
F - float mounting
S - spacers (straight spills only)
09, 15, 25, 37, 50
P- pin
S- socket
BLANK - solder buckets
300 • straight spills
500, 800 ·angled spills
400 • wire-wrap (3 levels)
800 · wire-wrap (2 levels)
052 • solder buckets
252 • straight spills
752 • angled spills
EUROPEAN STANDARD
HE 501
MIL-C24308C
QPL Qualified
C • without bracket
M • metal brackets
G • harpoons (angled spills only)
H · .shielding termination fingers (solder buckets only)
Uncontrolled Copy
BLANK • cadmium
T· tin
Z • zinc
X - dimples (standard on male tin plated shell)
PSOOMTX
technical characteristics:
D Shell
D Insulator
D Contact diameter
D Contact material
D Contact plating
D Termination plating
D Wire size
D Max. diameter
of insulated wire
cadmium plated steel
passivated standard
thermoplastic
self-extinguishing - UL 94 VO
1 mm
copper alloy
gold over nickel
gold or tin over nickel
lead AWG 20 max.
2.1 mm
D Operating temperature range
D Max. current rating
D Contact resistance
D Insulation resistance
D Max. voltage contacts
(V.r.m.s 50Hz)
D Rated voltage (V.r.m.s. 50Hz)
D Mechanical endurance
D Salt spray
D Damp heat
D Removable contacts
- 55 oc to + 125 oc
7.5 A per contact
~7.3 mO
~5000 MO
1000 v
300V
500 matings
48 hrs
56 days
No

specific dimensions (other dimensions, see p. 18)
2,72:!: 0,25
SOLDER BUCKETS
I~

8
[Q) D~CUJ[ID
DM series-HE 508
JisOURIAU
For particularly severe applications, especially high temperatures (155°C).
N F C 93425 I HE 508 - approved.
®m UL rated product- File E77927
These connectors are manufactured under CCQ (Central Quality Control).
ordering information
series
Shell size
options
number of contacts
tenninatioo type
plating
options
shell plating
E,A, B,C.D
------=--'
DBMV25P500MNTX
---------------~
M • characterization of DM series
BLANK- standard mounting hole (0 =3.10)
0 - clinch nut UNC 4.40
L • clinch nut M3
V • female screw lock
F · float mounting
S • spacers (straight spills only)
09, 15125,:!1,50
P- pin
S · socket
BLANK (HE 5) or 0 (others) • solder buckets ~
2, 3 • straight spills
5, 7, 8 • angled spills
machined contacts
4 • · Wire-wrap (3 levels)
6 • wire-wrap (2 levels) ~---~-~
BLANK • solder buckets l HE 508
00 • other terminations 5
Other protections· consult us
C • without bracket
M • metal brackets
G • harpoons (angled spills only)
H • shielding termination fingers (solder buckets only)
N • obligatory for HE 508
Uncontrolled Copy
BLANK • cadmium
T • tin
Z • zinc
X • dimples (standard on male tin plated shell)
Technical characteristics:
0 Shell
0 Insulator
0 Contact diameter
0 Contact material
0 Contact plating
0 Termination plating
0 Wire size
0 max. diameter
of insulated wire
cadmium plated steel passivated
(standard)
thermoset
self-extinguishing UL 94 VO
1 mm
copper alloy
gold over nickel
gold or tin over nickel
AWG 20 max.
2.1 mm
0 Operating temperature range
0 Max. current rating
0 Contact resistance
0 Insulation resistance
0 Max. voltage contacts
(V.r.m.s 50 Hz)
0 Rated voltage (V.r.m.s 50 Hz)
0 Mechanical endurance
0 Salt spray
0 Damp heat
0 Removable contacts
-55°C to + 155°C
7.5 A per contact
~7.3 mn
~5000 MD
1000 v
300 v
500 matings
48 hrs
56 days
No

specific dimensions (other dimensions, see p. 18)
SOLDER BUCKETS
3,55±0,5·
~l____
i' .... ~ !
lrx0.6
il
0

[Q)o~M[ID
DMW series
with mixed contacts
.lisOURIAU
Connectors derived from the DM series housing mixed arrangements of
standard signal and special contacts (coax, power, high voltage, optical...)
of a removable type.
Special contacts are selected in the table (p.11) and must be ordered
®-
separately.
This series meets the requirements of NF C 93425- HE 507 specifications.
UL rated product - File E118235
ordering information
series
D B M L 13W3 P 5 00 M N T X
shell size
characterization of DMW series
-optiOns _______ BLANK. standard mounting hoe (0 3.10)
contact
layouts
termination
type
plating
0 • clinch nut UNC 4.40
L • clinch nut M3
V • female screw lock
F · float mounting
S · spacers (straight spills only)
(see right)
P ·pin
S ·socket
BLANK (HE 5) or 0 (others)
solder buckets
2, 3 • straight spills
5, 7, 8 • angled spills
4 • wire-wrap (3 levels)
6 • wire-wrap (2 l&vels)
~ machined
~ contacts
BLANK- solder buckets ~ Europe
00 • other terminations 5 standard
C • without bracket
M ·metal brackets
G • harp()QnS (angled spills only)
H · shielding termination fingers (solder buckets only)
N • compulsary- in compliance with HE 507
~=~---~BLA ~ NK • cadmium
T ·tin
Z ·line
X • dimples (standard on male tin plated shell)
technical Characteristics: see DM series, page 6
specific dimensions
for standard terminations, see DM series, page 7.
layouts
(male insulator frontview)
Shell
size
Layout
E 5W1 \ ·,e; I
11W1
.. ·~
\•······;
A 7W2 \ e:,•.•!
B
3W3
21W1
\ ••• I
\ •••••• ·~~~~ ,~,,~ ••••• J
17W2
\.!~··••II!'•
···•·•· •7
13W3
Uncontrolled Copy
c
9W4
25W3
\• ••!•;;:,• I
\•• i:,•.•J
•• ,~,·!1!'~·11!'
\.••••••••••••• J
21WA4 \ • • ·::::~•:;: • •I
27W2
\. •••••••••••••• !!!~'''''''' J
awa
\••••••••!
47W1
~ ................. I
:,•,•;·~,·,·~·,·!\'l,'l,!!
10
CD Coaxial contact Angled spills
® Coaxial contact Straioht spills
Power contact
D
24W7
\ !,,.!,~.!,~.~I
36W4 \ ................... }
~~!'•!~'~'''!'''''''
• standard contacts
e coaxial and power contacts

Coax, power and high voltage contacts
These removable contacts are suitable for the contact cavities of the DMW series.
The coax contacts are in compliance with NF.C. 93569-KMX specification ..
power contact . taille 8 (to be ordered separately)
Wire Max.
Part numbers
Wire
size current
male
female
size
AWGB 40A 863().3()98N 8630-3099N AWG14
AWG12 20A IJ630.3056N ll630-3057N AWG16
Max.
current
Part numbers
male
female
15A IJ630.3osoN 8630-3061 N
lOA IJ630.3064N IJ630.3065N
Male
Female
-E3mEtF?:r F$E-:::r
i 21,85 : 21,73
coaxial contacts
I
Contact
type
Female
,El==m-~m =-=r=•·l
Screen
solder
E
I

[Q)o~M~
8630 series-HE 501
Ji'sOURIAU
Connectors accommodating removable machined contacts crimp type for
20/24 or 26/28 AWG wires.
MIL-C.24308 C and NFC 93425 ·HE 501 qualified- US-QPL listed and made
under CCQ.
ordering information
----,~-
8630 (8631: float mounting)
. shelf'piating .. - ....... , .···~- ---BLA
BLANK- standard mounting hole (0 =3.10}
0- clinch nut UNC 4.40
L - clinch nut M3
V • female screw lock
09, 15,25,37,50
P - shell for pins
s . shell for sockets
BLANK. with standard 20124 AWG contacts
L • without contact
--NK :cacimium (standard)
T • tin
Z ·zinc
0 25P[TX
X • dimples (standard on male tin plated shell)
~----------------- ---~------------------------------~
part number for the MIL.C 24308 C version
(MIL.C 39029 contact)
series
shell sizes
E, A, B, c, o
characterization ot S.MA series
option
~--
option
T • MIL tool
number of contacts 09, 15, 25, 37, 50
S B MA F T 25 P
F • float mounting
P • shell for pins
S • shell for sockets
technical characteristics:
0 Shell
0 Insulator
0 Contact diameter
0 Contact material
0 Contact plating
0 Contact termination
0 Wire sizes
0 Mechanical endurance
0 Operating temperature range
0 Max. current rating
0 Contact resistance
0 Insulation resistance
0 Max. voltage contacts
(V.r.m.s 50 Hz) at sea level
0 Salt spray
0 Damp heat
2
BLANK • with MIL contacts
L • without contact
L N
N • compulsary for classified QPL version
----~----'
cadmium plated steel passivated (standard)
thermoplastic self-extinguishing UL 94 VO
1 mm
copper alloy
gold over nickel
crimp
0.2 to 0.6 mm 2 (AWG 24 to 20)
max. 0 of insulated wire = 1.70 mm
500 matings
-55°C to + 125°C
7.5 A per contact
~7.3 mO
~5000 MO
1000 v
48 hrs
56 days
Contact part number:
see next page.
Uncontrolled Copy
This series can be directly ordered with
MIL part number.
See page 15.
Note: connectors ordered with contacts are delivred
with a plastic extraction tool.
specific dimensions

13
removable crimp contact ordering information
(for 8630 series, HE 501 and HE 508)
Contacts for European standard (HE 501 and HE 508) AWG 20/24
and contacts AWG 26/28.
;:
&
- --~---~
~ · ~95 ~
r---BiEP
13,65
Male contact
Female contact
AWG 20/24 AWG 26/28
male female male female
8630-162 8630-165 8631 -4111 8631-6121
contacts for MIL·C 24308 C connectors
Contact
Souriau
Norm
Color
type
code
AWG 20/24 male 8630-3020 A MIL-C. 39029·64 A white/blue/orange
female 8630-3022 A MIL-C. 39029-63 A grey/blue/orange
thermocouple contacts (available on all 8630 series)
Contact
type
Uncontrolled Copy
Constantan Cupro-tellure Chrome I Alumel
AWG 20/24 male 8630-466 8630-467 8630-432 8630-433
female 8630-468 8630-469 8630-434 8630-435
tooling part numbers
~er
I
Norm
Souriau
Crimp tool M22520/2-01 8476-01
Locator M22520/2-08 8476-08
Plastic
extraction - 8630-06A
tool
MIL
extraction M81969/18-2 8630-3330
tool

[Q) 0 ~QdJ[ID
8630 series-HE 508
JisOURIAU
Class + 155°C
Connectors accommodating removable machined contacts crimp-type
for 20/24 or 26/28 AWG wires.
For heavy duty applications.
ordering information
series
8630 (8631 float mounting)
options BLANK· standard mounting hole (0 =3.10)
0 · clinch nut UNC 4.40
L • clinch nut M3
V • female screw lock
number of contacts 09, 15, 25, 37, 50
options
shell plating
P • shell tor pins
S · shell tor sockets
BLANK· with standard 20/24 AWG contacts
L • without contact
N • compulsary tor HE 508
BLANK • cadmium • standard
T • tin
Z • zinc
X • dimples (standard on male tin plated shell)
L 25 P
Note: to order this series with a higher plating of the MIL·C 24308 type, use SMA reference system (seep. 12) and delete suffix "N".
Ex.: SAMA 15 P.
D Shell
D Insulator
D Contact diameter
D Contact material
D Contact plating
D Contact termination
D Wire sizes
D Mechanical endurance
D Operating temperature range
D Max. current rating
D Contact resistance
D Insulation resistance
D Max. voltage contacts
(V.r.m.s. 50 Hz)
at sea level
D Salt spray
D Damp heat
proof versions
cadmium plated steel passivated.
(standard)
Thermoset self-extinguishing UL 94 VO
1 mm
copper alloy
gold over nickel
crimp
0.21 to 0.60 mm 2 (AWG 24 to 20)
max. 0 of insulated wire: 1.70 mm
500 matings
-55°C to +155°C
7.5 A per contact
~7.3 mn
;;.:5ooo Mn
1000 V eft.
48 hrs
56 days
N T X
specifics dimensions
Uncontrolled Copy
14
012: drip-proof version.
Grommet + potting + interfacial seal.
Conform to IP 65
~r
~ I
015: dust-proof version. ~l ~l
-i j I! J.
Rear grommet.
i l
I: J
Ex.: 8630 25P012
8630 37S015

[Qt~ruJ[ID
8630 series
cross reference list for qualified part number HE 5 I MIL and SOURIAU
HE 501 and MIL·C 24308 C
Removal
crimp
contact
AWG 20/24
Connector type HE 501 SOURIAU
Connector
type
Standard
Float
mounting
M HE 501 N .. BP 8630 . . p
F HE 501 N . . BS 8630 .. S
M HE 501 F .. BP 8631 .. p
F HE 501 F . . BS 8631 .. S
MIL C 24308 C
Male
SOURIAU
Standard, M 24308/4-1 F SEMA09PN
with contacts, M 24308/4-2F SAMA15PN
without extraction M 24308/4-3F SBMA25PN
tool M 24308/4-4F SCMA37PN
M 24308/4·5F
SDMA50PN
Standard, M 24308/4·6F SEMAT09PN
with contacts, M 24308/4-7F SAMAT15PN
with Mil extraction M 24308/4-8F SBMAT25PN
tool M 24308/4-9F SCMAT37PN
M 24308/4-10F
SDMAT50PN
Standard, M 24308/4-259F SEMA09PN L
without contact, M 24308/4-260F SAMA15PN L
without extraction M 24308/4-261 F SBMA25PN L
tool M 24308/4-262F SCMA37PN L
M 24308/4-263F SDMA50PN L
Float mounting, M 24308/4-302F SEMAF09PN
with contacts, M 24308/4·303F SAMAF15PN
without extraction M 24308/4·304F SBMAF25PN
tool M 24308/4-305F SCMAF37PN
M 24308/4-306F SDMAF50PN
MIL C 24308 C
M 24308/2·1 F
M 24308/2-2F
M 24308/2-3F
M 24308/2-4F
M 24308/2·5F
M 24308/2·6F
M 24308/2-7F
M 24308/2-8F
M 24308/2-9F
M 24308/2-1 0F
M 24308/2-281 F
M 24308/2-282F
M 24308/2·283F
M 24308/2·284F
M 24308/2-285F
M 24308/2-342F
M 24308/2-343F
M 24308/2-344F
M 24308/2-345F
M 24308/2·346F
Uncontrolled Copy
Ex: HE 501 F 25 BP = 8631 25 P
HE 501 N 37 BS = 8630 37 S
Female
SOURIAU
SEMA09SN
SAMA15SN
SBMA25SN
SCMA37SN
SDMA50SN
SEMAT09SN
SAMAT15SN
SBMAT25SN
SCMAT37SN
SDMAT50SN
SEMA09SN L
SAMA15SN L
SBMA25SN L
SCMA37SN L
SDMA50SN L
SEMAF09SN
SAMAF15SN
SBMAF25SN
SCMAF37SN
SDMAF50SN
Float mounting, M 24308/4-313F SEMAFT09PN
with contacts, M 24308/4-314F SAMAFT15PN
with Mil extraction M 24308/4-315F SBMAFT25PN
tool M 24308/4·316F SCMAFT37PN
M 24308/4·317F SDMAFT50PN
M 24308/2-353F
M 24308/2-354F
M 24308/2-355F
M 24308/2-356F
M 24308/2-357F
SEMAFT09SN
SAMAFT15SN
SBMAFT25SN
SCMAFT37SN
SDMAFT50SN
HE 508
Removable
crimp
contacts
AWG 20/24
Connector type HE 508 SOURIAU
Standard
Float
mounting
M HE 508 N .. BP 8630 .. PN
F HE 508 N . . BS 8630 .. SN
M HE 508 F .. BP 8631 . . PN
F HE 508 F . . BS 8631 . . SN
Ex: HE 508 N 09 BP = 8630 09 PN
HE 508 N 15 BP = 8630 15 PN
HE 508 N 25 BP = 8630 25 PN
HE 508 N 37 BP = 8630 37 PN
HE 508 N 50 BP = 8630 50 PN
15

[Q)o~M[ID
8635 series
Ji'SOURIAU
SOURIAU 8635 connectors offer high density crimp contacts (size 22) in
shell sizes E, A, B, C and D).
They are recommended for aerospace and military applications.
The 8635 connectors meet the requirements of M 24308 specification and
a sealed version is also available (grommet and/or interfacial seal).
ordering information
series
options
number of contacts
options
shell plating
contact part numbers
Standard
MIL-C 24308 C
male
female
~~----------------------
BLANK • standard mounting hole (0 = 3.10)
0 · clinch nut UNC 4.40
L • clinch nut M3
V • female screw lock
F • float mounting
15, 26, 44, 62, 78
P · shell for pins
S · shell for sockets
BLANK • standard
015 • dust-proof • see page 14
012 • drip-proof • see page 14
BLANK • with standard contacts
L • without contact
BLANK • cadmium
T • tin
Z • zinc
X • dimples (standard on male tin plated shell)
Type Part numbers Color code
male 86354100
female 8635-9100
Souriau 86354110
MIL M 39029/58-360
Souriau 8635-9110
MIL M 39029157-354
orange/blue/black
Orange/green/yellow
8635 F 44 P 015 L T X
tooling part numbers
-Crimp tool
Souriau type: 8476-01
Standard type: M22520/2-01
- Locator:
male contacts: 8476-09
(M22520/2-09)
female contacts: 8476-06
(M22520/2-06)
- plastic insertion tool:
8599-0022 (M81969-14-01)
Uncontrolled Copy
t echnical characteristics:
0 Shell
0 Insulator
0 Contact diameter
0 Contact material
0 Contact plating
0 Contact termination
0 Wires sizes
0 Operating temperature range
0 Max. current rating
0 Contact resistance
0 Insulation resistance
0 Max. voltage contact
(V.r.m.s 50 Hz)
at ground level
0 Salt spray
0 D am p heat
16
cadmium plated steel passivated ·
thermoset self-extinguishing UL 94 VO
0.76 mm
copper alloy
gold over nickel
crimp
0.095 mm 2 to 0.34 mm 2 (AWG 28 to 22)
0 max of insulator: 1.37 mm (AWG 22)
0 min/max of insulator (type 012 and 015):
0.76 mm to 1.09 mm
-55°C to +155°C
5 A per contact
~14.6 m!J
;;::,5000 M!J
1000 V eft.
48 hrs
56 days
specific dimensions
(other dimensions: see page 18).
f ­
~ 1
~ l

layouts (male insulator front view)
Contacts are individually numbered
on both sides of the insulator.
standard connector
E
A
B
c
1e • • • es
6 •••• 9
9 contacts
1 ••••••••••••••••••• 19
w••••••••••••••••••~
1e • • • • • • ea
9 ••••••• 15
37 contacts
high density connectors 8635 series
E
D
1 ••••••••••••• 13
14 •••••••••••• 25
15 contacts 25 contacts
1 ••••••••••••••••• 17
18 •••••••••••••••• 33
4 ••••••••••••••••• 60
Uncontrolled Copy
A
B
50 contacts
15 contacts
19········26
w•••••••••••••••m
,••••••••• 9
1•••••••••••••••m
10 ••••••••• 18
~·······~····••«
26 contacts 44 contacts
c
D
1 ••••••••••••••••••••• 21
a••••••••••••••••••••~
~····················~
62 contacts
, •••••••••••••••••••• w
~···················~
4~···················~
~···················~
78 contacts
17

JTsOURIAU
shell dimensions
Inside dimensions
of male connector
A
c
f-0 '
E
A
8
c
D
p
s
p
s
p
s
p
s
p
s
View of mating faces
c~~=B =~
A±0.38
30.81
30.81
39.14
39.14
53.03
53.03
69.32
69.32
66.93
66.93
External dimensions
of female connector
8±0.13 C±0.13
16.91 24.99
16.33 24.99
25.24 33.32
24.66 33.32
38.96 47.04
38.37 47.04
55.42 63.50
54.83 63.50
52.80 61.11
52.42 61 .11
0±0.13
8.35
7.89
8.35
7.89
8.35
7.89
8.35
7.89
11.20
10.74
·I
H
~{
0 3,05:1:0,15
E±0.38 F max. Gciu.z H±0.25 J±0.25 K±0.2 L±0.12
12.55 10.99 5.85 19.27 10.71 1.10 0.90
12.55 11.21 6.05 19.27 10.71 1.10 0.90
12.55 10.99 5.85 27.50 10.71 1.10 0.90
12.55 11.21 6.05 27.50 10.71 1.10 0.90
12.55 11.07 5.75 41 .27 10.71 1.10 0.90
12.55 11.21 6.05 41.27 10.71 1.10 0.90
12.55 11.09 5.75 57.70 10.71 1.50 1.11
12.55 11.21 6.05 57.70 10.71 1.10 0.90
15.37 11.09 5.75 55.32 13.56 1.50 1.11
15.37 11.21 6.05 55.32 13.56 1.10 0.90
Uncontrolled Copy
PC card drilling dimensions (mm) Nota: For MIL contacts (0 0.76), drilling 0 1 mm.
~
t -= -~- -j= -
1 2,7~1 '!'~ 0 3,2+g.2
1~37 ' 1,37 - -
" -
..,. ..,. f --G-o tt·O--- .
Ill~"!. [ - - - --
"' "' t - -r ... r-" ·t-t-274
1 11 ~ ~
9 contacts 15 contacts 25 contacts
37 contacts 50 contacts
18
Note: pitch between row = 2,84 mm for straight spills.

panel cutouts:
Cutout for mounting
from rear or front of panel
A 10°
---~C:___ - --~
Cutout for mounting
from rear of panel only
A 10°
' $
.. -----±-__gpanel
mounting
""- R: 0,80 max.
"""
r
12l D
,~ ·--
Shell
size
E
A
B
c
D
Type of Mounting
mounting position
rigid
float
rigid
float
rigid
float
rigid
float
rigid
float
front
rear
front
rear
front
rear
front
rear
front
rear
front
rear
front
rear
front
rear
front
rear
front
rear
A B c D E
±0.1 ±0.1 ±0.1 ±0.05 ±0.1
22.20 13.00 24.99 3.20 2.10
20.50 11 .40 24.99 3.20 3.30
23.00 13.80 24.99 2.20 2.10
21.30 12.20 24.99 2.20 3.30
30.50 13.00 33.32 3.20 2.10
28.80 11 .40 33.32 3.20 3.30
31 .30 13.80 33.32 2.20 2.10
29.60 12.20 33.32 2.20 3.30
44.30 13.00 47.04 3.20 2.10
42.50 11.40 47.04 3.20 3.30
45.10 13.80 47.04 2.20 2.10
43.30 12.20 47.04 2.20 3.30
60.70 13.00 63.50 3.20 2.10
59.10 11 .40 63.50 3.20 3.30
61.50 13.80 63.50 2.20 2.10
59.80 12.20 63.50 2.20 3.30
58.30 15.80 61 .11 3.20 2.10
56.30 14.10 61.11 3.20 3.30
59.20 16.60 61.11 2.20 2.10
57.20 14.90 61 .11 2.20 3.30
It is recommended that only one of a pair of connectors should have a float mounting. Rigid mounting connectors require
2 screws 03 mm, float mounting connectors require 2 screws 02 mm.
15,