28.08.2015 Views

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TECHNICAL SPECIFICATION FOR<br />

SUPPLY, INSTALLATION & <strong>CO</strong>MMISSIONING OF<br />

HIGH PRESSURE HOMOGENIZE 10000 LPH<br />

81<br />

ANNEXURE –X<br />

DELIVERY PERIOD: 4 MONTHS<br />

This shall be used for Homogenization of Milk, Ice Cream Mixes etc.<br />

1. Functional Requirement :<br />

2. CAPACITY: 10000 LITRE PER HOUR<br />

3. PRESSURE: 200 Kg. per cm Sq.<br />

4. MOTOR : 75 KW<br />

5. The Homogenizer will be of rugged design suitable mounted on solid Mild<br />

Steel frame covered with SS cabinet enclosure made of imported AISI 304.<br />

6. Homogenize will be of sanitary design.<br />

7. Crankcase is made out of solid spheroidal Gray cast iron suitable to withstand<br />

the load<br />

8. Homogenize Chamber is made out of single piece forged AISI 316 Block and<br />

tested with ultra sound and grounded to get the required finish.<br />

The chamber block is housed with removal and replaceable type suction and<br />

delivery valve and valve sheets.<br />

All concerned parts shall be made out of SS 316.<br />

The Gasket coming in contact with the product will be of Food Grade, Nontoxic,<br />

Fat resistant and Non-absorbent with smooth surface.<br />

10. Crank shaft, connecting rode and bearings would be made out of single piece<br />

forged Alloy steel, checked by ultra sound and grounded to get the required<br />

tolerance.<br />

11. Suction and discharge valves will be of Ball Type and are made of special<br />

material to withstand the impact load due to continuous opening and closing of<br />

valves.<br />

12. Homogenizing valves are made of special Material (tungsten carbide) to<br />

withstand the abrasion and turbulence created because of high velocity of the<br />

product (satellite or tungsten carbide valves).<br />

13. The high pressure Homogenizer will be two-stage design suitable for operating<br />

pressure of 200 Kg. per cm Sq..<br />

14. Pressure adjustment system will be manual with the help of adjustment screw.<br />

15. The Homogenizer will be coupled through belt & pulley with the suitable<br />

HP/RPMTEFC Electric motor of Reputed make (Three phase) TEFC Electric<br />

motor of Crompton / NGEF make.<br />

16. The Homogenizer equipped with speed reduction system.<br />

17. Homogenizer will be provided with :-<br />

(i) Diaphragm type pressure gauge on chamber.<br />

(ii) Commissioning spares – 1 Set.<br />

(Signed & sealed by the tenderer<br />

in token of acceptance of above)<br />

(RCDF)<br />

Jaipur

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!