RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

18.0 Erection & Inspection :
18.1 Erector shall prepare a detailed and comprehensive erection schedule for
review and approval of RCDF‟s site Engineer and supplier‟s erection
supervisors. This „Approved‟ erection schedule shall form the basis for
evaluating the pace of all the erection works to be performed by erector.
18.2 The schedule shall show approximately the date on which each part of
divisions of the work is expected to begin based on his knowledge of the works
of the other contractors and the date when the work is schedules to be finished.
Upon the request of RCDF erector should be prepared to discuss his schedule
in relation to the master schedule and shall co-ordinate his work with that of
the other erectors/contractors as determined by RCDF.
18.3 The work so far as it is carried out on RCDF‟s promised shall be carried out at
such time as RCDF may approve consistent with the construction schedule and
so as not to interfere unnecessarily with the conduct of RCDF‟s business and
RCDF will give erector all reasonable assistance for carrying out the work.
18.4 Erector shall revise and up date his erection schedule periodically (atleast once
every calendar month) to indicate actual progress of works, in relation to
scheduled progress. Erector shall also submit monthly progress reports
indicating progress work giving scheduled and actual percentage completions,
causes for delay etc. as well as such other reasonable reports RCDF may
request from time to time.
18.5 Adherence to the instructions of supervisory engineers of manufacturers, where
provided by RCDF is compulsory. Erector shall work as per the procedure
suggested by manufacturer and shall complete erection of equipment in such a
way so as not to interfere with or prevent equipment from functioning as
intended, as well as to the entire satisfaction of the manufacturer‟s
supervisor/RCDF. Erector shall also permit and provide all facilities for
manufacturer‟s erection super visors to carry out all checks that they may wish
to and approve any erection procedure and/or final setting and alignment of
components, in order to satisfy themselves that erection has been carried out as
intended by them. This shall, however, in no way relieve erector of his
responsibility for providing adequate and competent supervision and quality
workmanship. In case of any dispute, the decision of the RCDF/Manufacturer‟s
erection supervisor shall be final and binding on the erector.
18.6 Erector shall haul materials and equipment furnished at RCDF‟s storage or
unloading areas to the points where they are to be used, in the construction
work, install the materials and equipment in their final location and classify
and store all surplus and auxiliary parts in a systematic manner in the
warehouse, where they can be readily identified and located when needed at a
later date.
40
(Signed & sealed by the tenderer
in token of acceptance of above)
(RCDF)
Jaipur