Instructions Manual

More documents

Recommendations

Info

Grub Screw M3x3 MSH 50117 Tips/<strong>Instructions</strong> Apply thread lock to M3x5 grub screw. MSH 50006 Hex Grub Screw M3x3 MSH 50117 ! CAUTION Make sure there is about 1mm gap between bottom of motor adapter (MSH 50006) and motor mount (MSH 50028) when tightened in position. 28
Washer 3.1x10x1 MSH 50121 MSH 50052 Washer 3.1x10x1 MSH 50121 Free spin Motor Pulley 18T MSH 50121 While inserting make sure that the pinion spins freely clockwise looking from above. 29
Page 1 and 2: RC Helicopter Instructions Manual M
Page 3 and 4: BAG-A Tips/Instructions Hex screw M
Page 5 and 6: BAG-B Attention Hex Screw M2.5x6 MS
Page 7 and 8: Tips/Instructions Slide skid in bot
Page 9 and 10: BAG-C Belt from box Hex Screw M2x6
Page 11 and 12: 25.6 mm 28 mm Tips/Instructions BAG
Page 14 and 15: BAG-D MSH 50027 Tips/Instructions A
Page 16 and 17: BAG-D MSH 50088 Hex Screw M2x6 MSH
Page 18 and 19: Tips/Instructions Hex Screw M3x8 MS
Page 20 and 21: BAG-E BB 3x8x3 MSH 50033 Pin 3x14 M
Page 22 and 23: BAG-F Tips/Instructions Do not over
Page 24 and 25: BAG-F Tail Pitch Lever Screw M2.5x5
Page 26 and 27: BAG-F Hex Screw M3x12 MSH 50111 Hex
Page 28 and 29: 35 mm Rod E 35mm MSH 50045 BAG-G Ti
Page 32 and 33: Tips/Instructions Use O ring MSH 50
Page 34 and 35: Spare Code Spare Description Part C

Instructions Manual

Create successful ePaper yourself

Delete template?

Save as template?