Instructions Manual

More documents

Recommendations

Info

BAG-F Tail Pitch Lever Screw M2.5x5 MSH 50100 MSH 50077 Tips/Instructions Do not full tight tail pitch lever screw, just screw it until fully seated. Ball Screw M2x4.8 MSH 50007 BB 3x6x2.5 MSH 50037 Tail Pitch Lever Screw M2.5x5 MSH 50100 Pitch Lever Bush 2.5x3x8.6 MSH Ball Screw M2x4.8 MSH 50007 BAG-F Hex Screw M2.5x16 MSH 50106 Tips/Instructions Do not over tight M2.5x16 screw. It needs to be tightened to the point of have no play and run freely. Hex Screw M2.5x16 MSH 50106 Nylon Nut M2.5 MSH 50124 Nylon Nut M2.5 MSH 50124 22
Tips/Instructions Make sure BB 3x8x4 is completely seated in tail blade holder. Ball Screw M2x4.8 MSH 50007 MSH 50076 BAG-F BB 3x8x4 MSH 50035 Hex Screw M3x12 MSH 50111 Ball Screw M2x4.8 MSH 50007 Hex Screw M3x12 MSH 50111 BAG-F Grub Screw M3x3 MSH 50117 MSH 50022 Grub Screw M3x3 MSH 50117 Tips/Instructions Apply thread lock to grub screw M3x3. 23
Page 1 and 2: RC Helicopter Instructions Manual M
Page 3 and 4: BAG-A Tips/Instructions Hex screw M
Page 5 and 6: BAG-B Attention Hex Screw M2.5x6 MS
Page 7 and 8: Tips/Instructions Slide skid in bot
Page 9 and 10: BAG-C Belt from box Hex Screw M2x6
Page 11 and 12: 25.6 mm 28 mm Tips/Instructions BAG
Page 14 and 15: BAG-D MSH 50027 Tips/Instructions A
Page 16 and 17: BAG-D MSH 50088 Hex Screw M2x6 MSH
Page 18 and 19: Tips/Instructions Hex Screw M3x8 MS
Page 20 and 21: BAG-E BB 3x8x3 MSH 50033 Pin 3x14 M
Page 22 and 23: BAG-F Tips/Instructions Do not over
Page 26 and 27: BAG-F Hex Screw M3x12 MSH 50111 Hex
Page 28 and 29: 35 mm Rod E 35mm MSH 50045 BAG-G Ti
Page 30 and 31: Grub Screw M3x3 MSH 50117 Tips/Inst
Page 32 and 33: Tips/Instructions Use O ring MSH 50
Page 34 and 35: Spare Code Spare Description Part C

Instructions Manual

Create successful ePaper yourself

Delete template?

Save as template?