Instructions Manual

More documents

Recommendations

Info

BAG-D MSH 50027 Tips/Instructions Apply Thread lock on hex screw M2.5x5 and outside BB 2.5x6x2.5. Hex Screw M2.5x5 MSH 50101 Hex Screw M2.5x5 MSH 50101 MSH 50085 BB 2x5x2.5 Flanged MSH 50091 BB 2.5x6x2.5 Flanged MSH 50093 ! CAUTION While tightening screw M2.5x5 to flybar carrier please use two Allen keys in counter action with flybar carrier at 90 degrees with main Hub. Ball Screw M2x4.8 MSH 50007 Tips/Instructions Do not over tight balls. Just 1/8 turn after completely seated. 12
5.4 mm BAG-D Hex Screw M2x6 MSH 50098 Hex Screw M2x6 MSH 50098 MSH 50026 Grub Screw M3x3 MSH 50117 Grub Screw M3x3 MSH 50117 Uniball Hand S MSH 50036 Rod A 16.4 mm MSH 50048 NOTE: User to have 2 sets of: MSH 50036 and 2no's MSH 50048 MSH 50008 Rod A 16.4mm MSH 50048 Flybar Rod MSH 50010 (contained in Bag L) Tips/Instructions Use thread lock on screws M2x6 and grub screws M3x3. 13
Page 1 and 2: RC Helicopter Instructions Manual M
Page 3 and 4: BAG-A Tips/Instructions Hex screw M
Page 5 and 6: BAG-B Attention Hex Screw M2.5x6 MS
Page 7 and 8: Tips/Instructions Slide skid in bot
Page 9 and 10: BAG-C Belt from box Hex Screw M2x6
Page 11 and 12: 25.6 mm 28 mm Tips/Instructions BAG
Page 16 and 17: BAG-D MSH 50088 Hex Screw M2x6 MSH
Page 18 and 19: Tips/Instructions Hex Screw M3x8 MS
Page 20 and 21: BAG-E BB 3x8x3 MSH 50033 Pin 3x14 M
Page 22 and 23: BAG-F Tips/Instructions Do not over
Page 24 and 25: BAG-F Tail Pitch Lever Screw M2.5x5
Page 26 and 27: BAG-F Hex Screw M3x12 MSH 50111 Hex
Page 28 and 29: 35 mm Rod E 35mm MSH 50045 BAG-G Ti
Page 30 and 31: Grub Screw M3x3 MSH 50117 Tips/Inst
Page 32 and 33: Tips/Instructions Use O ring MSH 50
Page 34 and 35: Spare Code Spare Description Part C

Instructions Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?