Interoperability List - Snom
Interoperability List - Snom
Interoperability List - Snom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Interoperability</strong> <strong>List</strong><br />
The snom 100, 105 and 200 support the most relevant features that have been defined in the open<br />
standards SIP and H.323. That gives the customer a wide choice of interoperable devices. The<br />
following list gives an overview of the interoperability of our snom phones with other devices.<br />
snom 100, 105, 200 / H.323<br />
Gateways:<br />
snom <strong>Interoperability</strong> <strong>List</strong><br />
01 Aug 2003, Version 1.1<br />
© 2003 snom technology AG<br />
All rights reserved.<br />
Subject to change without notice.<br />
Product Protocol Version Interop. Degree Comments<br />
AudioCodes MP 104 (Analog FXS) H.323<br />
AudioCodes MP 108 (Analog FXS) H.323<br />
AudioCodes MP 124 (Analog FXS) H.323<br />
AudioCodes MP 104 (Analog FXO) H.323<br />
AudioCodes MP 108 (Analog FXO) H.323<br />
AudioCodes Mediant2000 Series<br />
1T1/E1 - 16 T1/E1(Digital<br />
Gateway)<br />
H.323<br />
Cisco 2600/3600 Routers H.323/H.450<br />
Cisco AS5300 H.323<br />
IOS version<br />
12.0(7)T<br />
IOS version<br />
12.2 (2) XA4<br />
Cisco Call Manager H.323 3.1<br />
Basic call, facility-<br />
based supplementary<br />
services<br />
Basic call, facility-<br />
based supplementary<br />
services (Hold)<br />
Basic call, facility-<br />
based supplementary<br />
services (Hold)<br />
You have to set<br />
the codecs to 20<br />
ms packet size at<br />
least for the 2600<br />
series and less<br />
than 30 ms for the<br />
5300 series.<br />
The Cisco AS5300<br />
only does H.323<br />
basic call and<br />
hold according to<br />
standard.<br />
The Cisco Call<br />
Manager only does<br />
H.323 basic call<br />
and hold according<br />
to standard.<br />
Note: In the CCM, just configure an H.323 client (type in the IP Address of the snom phone in the “Device” field) and<br />
press update, then press reset device.<br />
You must configure the snom phone as follows:<br />
1. Set the phone type to H.323<br />
2. Menu/Settings/H.323/GK-GW-Mode=Gateway.<br />
3. Menu/Settings/H.323/GK-GW-Mode=IP Address of the CCM<br />
Set the phone identity to the number configured at the CCM. Clear the user name to (should not be necessary<br />
but maybe later Cisco will look at the H.323 address in a setup and get confused).<br />
Menu/Settings/H.323/FastStart: off<br />
Menu/Settings/H.323/EarlyStart:on<br />
Menu/Settings/H.323/H.245 Tunnelling: off<br />
Menu/Settings/H.323/H.450 Services: off<br />
Eicon VoIP Server H.323 Basic call,<br />
Innovaphone IP 3000 H.323 V4.00<br />
Basic call and H.450<br />
based supplementary<br />
services<br />
The snom 100<br />
and the IP 3000<br />
are compatible.<br />
Supports divert,<br />
direct and<br />
consultation<br />
transfer.<br />
www.snom.com
snom technology AG<br />
snom 100 recommended settings for IP3000:<br />
Fast start: off<br />
Early start: on<br />
H.450 mode: on<br />
H.245 Tunneling: off<br />
<strong>Interoperability</strong> <strong>List</strong> 1.1<br />
Product Protocol Version Interop. Degree Comments<br />
Innovaphone IP21: IP Terminal/<br />
Fax Adapter<br />
Innovaphone IP400 H.323 V4.00<br />
snom 100 recommended settings for IP400:<br />
Fast start: off<br />
Early start: on<br />
H.450 mode: on<br />
h.245 Tunneling: off<br />
Komodo gateway H.323 v2.15<br />
MediaStreams ISDN Gateway H.323<br />
TEDAS Phoneware Gateway H.323 2.6<br />
H.323 V4.00 Basic call and H.450<br />
Vegastream Vega 100 H.323 Basic call<br />
Vegastream Vega 50 H.323 Basic call<br />
snom 100 recommended settings for Vega 100/50:<br />
Menu/Settings/Codec/Codec/Packet size = 20 or 30 ms<br />
Fast start: off<br />
Early start: on<br />
H.450 mode: on<br />
h.245 Tunneling: off<br />
MultiVoIP Gateway H.323 v2.52 Basic call<br />
Gatekeepers:<br />
bConvergent OpenVoice H.323 Basic call<br />
MediaStreams Gatekeeper H.323<br />
Basic call and H.450<br />
based supplementary<br />
services (Divert, Hold,<br />
Transfer, Call Pickup)<br />
Basic call and facility<br />
based Call transfer<br />
Basic call and Path<br />
Replacement Indication<br />
for Call Transfer and<br />
Pickup<br />
Basic call and key code<br />
based supplementary<br />
services (Conference,<br />
Music on hold, Transfer,<br />
Call Pickup)<br />
Basic call,Path<br />
Replacement Indication<br />
for Call Transfer<br />
and Team Pickup<br />
functionality.<br />
The snom 100 and<br />
the IP 400 are<br />
fully compatible.<br />
Supports transfer.<br />
Transfer is not<br />
supported by<br />
IP400 in the PBX<br />
mode. Please<br />
configure a VoIP<br />
gateway in IP 400<br />
instead.<br />
Conference,<br />
Hold,Transfer,<br />
and Call<br />
Pickup through<br />
configurable PBX<br />
keycodes.<br />
2
snom technology AG<br />
<strong>Interoperability</strong> <strong>List</strong> 1.1<br />
Product Protocol Version Interop. Degree Comments<br />
OpenH.323 Gatekeeper H.323<br />
Version 1.0/<br />
2.0 Beta 9<br />
Basic call<br />
RADVision GK 323 Gatekeeper H.323 Version 3.0 Basic call<br />
TEDAS Phoneware Gatekeeper H.323 2.6<br />
HardPhones:<br />
Basic call and key code<br />
based supplementary<br />
services (Conference,<br />
Music on hold, Transfer,<br />
Call Pickup)<br />
Adtech SI-160 H.323 Basic call + H.450 Hold<br />
Cisco IP phone 12 SP+ H.323<br />
Cisco IP phone 30 VIP H.323<br />
Cisco IP Phone 7910 H.323<br />
Cisco IP Phone 7960 H.323<br />
Datus 250T/250TG H.323 Basic call<br />
Elesign IP phone H.323 Basic call<br />
Innovaphone IP200 H.323 V4.00<br />
snom 100 recommended settings for IP200:<br />
Fast start: off<br />
Early start: on<br />
H.450 mode: on<br />
H245 Tunneling: off<br />
Nicstel Digital Internet Phone H.323<br />
Siemens optipoint 300/400 H.323<br />
Softphones:<br />
Buddyphone 4 H.323 Version 4.15<br />
Basic call and facilitybased<br />
Call Transfer<br />
Basic call and facilitybased<br />
Call Transfer<br />
Basic call and facilitybased<br />
Call Transfer<br />
Basic call and facilitybased<br />
Call Transfer<br />
Basic call + H.450 suite<br />
(Hold, Transfer)<br />
Basic call (No<br />
supplementary services<br />
supported by this device)<br />
Basic call + H.450 suite<br />
(Hold, Transfer, Divert)<br />
Basic call (No<br />
supplementary<br />
services supported by<br />
this client)<br />
Conference,<br />
Hold,Transfer, and<br />
Call Pickup through<br />
configurable PBX<br />
keycodes.<br />
Call transfer is buggy<br />
in the H.323 stack<br />
(RAD Vision ) used by<br />
this device. This is a<br />
well known bug.<br />
The snom 100<br />
and the IP 200<br />
are compatible.<br />
Supports both direct<br />
and consultation<br />
transfer. There is<br />
no way to initiate a<br />
direct call transfer<br />
from IP200<br />
These are the<br />
only hardphones<br />
supporting the<br />
full suite of H.450<br />
services like<br />
snom100/200. Fully<br />
compatible.<br />
3
snom technology AG<br />
<strong>Interoperability</strong> <strong>List</strong> 1.1<br />
Product Protocol Version Interop. Degree Comments<br />
Mediastreams e-phone client H.323<br />
Microsoft Netmeeting H.323 Version 3.0<br />
Mioco Softphone H.323<br />
OpenH.323 Ohphone H.323 To date<br />
OpenH.323 Openphone H.323 To date<br />
Siemens OptiClient 350/360 H.323<br />
TEDAS Phoneware Basic H.323 2.6<br />
Voxphone Gold H.323 V2.0<br />
snom 100, 105, 200 / SIP<br />
Gateways:<br />
Basic call and Path<br />
Replacement Indication<br />
for Call transfer<br />
Basic call (No<br />
supplementary<br />
services supported by<br />
this client)<br />
Basic call (No<br />
supplementary<br />
services supported by<br />
this client)<br />
Basic call, H.450 suite<br />
and facility- based<br />
supplementary services<br />
Basic call, H.450 suite<br />
and facility- based<br />
supplementary services<br />
Basic call, H.450 suite<br />
(Hold, Transfer, Divert)<br />
Basic call, key codes<br />
based supplementary<br />
services<br />
Basic call (No<br />
supplementary services<br />
supported by this<br />
client)<br />
Ohphone does<br />
not support<br />
consultation<br />
transfer.<br />
Openphone does<br />
not support<br />
consultation<br />
transfer.<br />
These are the<br />
only softphones<br />
supporting the<br />
full suite of H.450<br />
services like<br />
snom100/200.<br />
Fully compatible.<br />
Product Protocol Version Interop. Degree Comments<br />
AudioCodes MP 104 (Analog FXS) SIP<br />
AudioCodes MP 108 (Analog FXS) SIP<br />
AudioCodes MP 124 (Analog FXS) SIP<br />
AudioCodes MP 104 (Analog FXO) SIP<br />
AudioCodes MP 108 (Analog FXO) SIP<br />
AudioCodes Mediant2000 Series<br />
1T1/E1 - 16 T1/E1(Digital Gateway)<br />
SIP<br />
Medatrix SIP MxSF/<br />
v3.1.9.21<br />
Vegastream Vega100 SIP<br />
E1 NAT SIP<br />
T123<br />
redirect<br />
Sonus SIP 100rel<br />
redirect, music on<br />
hold, transfer<br />
4
snom technology AG<br />
Proxies:<br />
<strong>Interoperability</strong> <strong>List</strong> 1.1<br />
Product Protocol Version Interop. Degree Comments<br />
Alcatel SIP Loose routing<br />
BroadSoft SIP Authentication<br />
Cisco SIP CSPS<br />
dynamicsoft SIP Authentication<br />
Hughes SIP<br />
Hughes SDF<br />
1.1.1<br />
Authentication<br />
Indigo SIP Authentication<br />
Intertex SIP<br />
IX66 Version<br />
1.21<br />
Jasomi SIP NAT ALG NAT<br />
HardPhones:<br />
3Com SIP Basic Call<br />
Cisco 7960 SIP<br />
P0S30202,<br />
P0S303-1-00<br />
ipDialog SIP SIPToneTM<br />
Komodo SIP v2.15<br />
NAT<br />
Hold, Redirect,<br />
Transfer<br />
Mitel SIP 5140 Hold, Redirect<br />
Pingtel xpressa Business Phone SIP<br />
Siemens OptiPoint 400/300 SIP<br />
Softphones:<br />
Hold,Redirect<br />
Transfer<br />
Hold ,Transfer and<br />
Divert<br />
eStara Softphone SIP v3.0.0.14 Hold, Redirect<br />
HearMe SIP Hold<br />
Interval SIP Hold<br />
Phone not available<br />
any more<br />
5
Europe & ROW:<br />
snom technology AG<br />
<strong>Interoperability</strong> <strong>List</strong> 1.1<br />
Microsoft© Messenger SIP v4.6<br />
Ubiquity SIP SIP Center UA<br />
Basic Call, Text<br />
messages and Online<br />
presence (snom100/<br />
200 is the only SIP<br />
phone able to receive<br />
and display text<br />
messages from the<br />
Microsoft Messenger)<br />
Wipro SIP Hold, Redirect<br />
Pingtel instant xpressa SIP v2.0.1.3<br />
snom technology AG<br />
Pascalstr. 10B<br />
10587 Berlin, Germany<br />
Phone: +49 (30) 39833-0<br />
mailto:info@snom.de<br />
http://www.snom.com<br />
sip:info@snom.com<br />
USA and Americas:<br />
snom USA Representation<br />
ABP International, Inc.<br />
1203 Crestside Dr.<br />
Coppell, Texas 75019, USA<br />
Phone: +1-972-831-0280<br />
mailto:usa@snom.de<br />
sip:usa@snom.com<br />
India and SAARC:<br />
snom technology (India) Pvt Ltd.<br />
No. 417, International Trade Tower<br />
Nehru Place, New Delhi-110019<br />
Phone: +91 11 26234097<br />
Fax: +91 11 26234079<br />
http://www.snomindia.com<br />
mailto:info@snomindia.com<br />
sip:india@snom.com<br />
Hold, Transfer and<br />
Divert<br />
snom100/105/200<br />
is the only SIP<br />
phone which is able<br />
to relay presence<br />
notification to<br />
the Microsoft<br />
Messenger.<br />
This enables a<br />
messenger user<br />
to simply click<br />
and call the snom<br />
phone from the<br />
contact list.<br />
6
Change language