DUAL 1000-TWIN RIMS Simple coupling! - Kock und Sohn

Installation -
quick and easy!
DUAL 1000-TWIN RIMS

Simple coupling!
A simple but powerful system for small tractors used for cultivating wine
and fruit, small loaders and trailers up to 28“ rim diameter.
Dependant on performance and vehicle gross weight, 2 or 3 spindles per
wheel should be inserted. The power of the vehicle should not
exceed 60 kW (82 PS).
Advantages: DUAL 1000
- Well-concepted and simple construction for
installation from the outer � twin wheel
- Easy tightening of the twin wheel
by a special nut �
- A stop-spacer ring provides easy installation �
- 5°-shoulder fitting on the main wheel provides
perfect positioning
- Distance between the wheels can be
determined individually
- No welding on the tractor wheel
- Installation requires only one person
- Fitting with 2 - 3 spindles
�
�
Advantages: eye nut and hook
- Easy installation
- No contamination of the eye nut
- No wear to the eye nut or hook
DUAL 1000 only
with 5° stop-spacer ring
All DUAL 1000 twin rims of 12-28“ diameter have our 5° stop-spacer ring �.
This adds even more comfort to the installation and dismantling. By aligning with the
5° shoulder � the optimum position of the twin wheel is easily achieved. The crimped
reinforcing seam of the spacer ring with the 5° shoulder allows considerable advantages for
handling the twin wheel:
Easier installation through
5° shoulder positioning
Easier dismantling as no jamming
of the twin wheel is possible
�
�
�
�
KOCK
& SOHN
TWIN
SYSTEMS
APPROVED BY TÜV
No lateral run out caused by tilting of
the twin wheel
Optimum positioning of the twin wheel
for all rim types - deep bed, wide and
angular shoulder rims
Höfener Straße 1+ 3 · D-48496 Hopsten-Schale
Fon +49 (0) 54 57/ 9 30 90 · Fax +49 (0) 54 57 93 09 10
www.kock-sohn.de · info@kock-sohn.de
DUAL 1000-TWIN RIMS