Chapter 3 Accessing the GV-DSP LPR
Chapter 3 Accessing the GV-DSP LPR Chapter 3 Accessing the GV-DSP LPR
5.1.2 Upgrading Firmware by Using the UtilityThe Video Server Utility provides a direct way to upgrade the firmware to multiple GV-DSPLPRs.1. Run Install Utility.exe from the Software CD.2. Double-click the Video Server Utility icon which is created on your desktop. Thisdialog box appears.Figure 5-23. Click the Search button to locate the available GV-DSP LPRs on the same LAN. Orclick the New button and assign the IP address to locate a GV-DSP LPR over theInternet. Or highlight one GV-DSP LPR in the list and click the Delete button to removeit.4. Double-click one GV-DSP LRP in the list. This dialog box appears.Figure 5-332
5Advanced Applications5. Click the Firmware Upgrade tab. This dialog box appears.Figure 5-46. Click the Browse button to locate the firmware file (.img) saved at your local computer.7. If you like to upgrade all the GV-DSP LPR in the list, check Upgrade all video servers.8. Type Password, and click Upgrade to process the upgrade.5.2 Backing Up and Restoring SettingsWith the Utility included in the Software CD, you can back up the configurations in the GV-DSP LPR, and restore the backup data to the current unit or import it to another unit.To back up the settings:1. Run Video Server Utility and locate the desired GV-DSP LPR. See Steps 1-3 in 5.1.2Upgrading Firmware by Using the Utility.2. Double-click the GV-DSP LPR in the list. Figure 5-3 appears.33
- Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
- Page 3 and 4: ContentsChapter 1 Introduction ....
- Page 5 and 6: 1IntroductionChapter 1 Introduction
- Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
- Page 10 and 11: 1. Open your web browser, and type
- Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
- Page 14 and 15: 3.2.1 The Live View Window189234567
- Page 16 and 17: 3.2.4 Video RecordingYou can record
- Page 18 and 19: Chapter 4 Administrator ModeThe Adm
- Page 20 and 21: [Video Signal Type] The GV-DSP LPR
- Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
- Page 24 and 25: 4.2.2 Output SettingThe GV-DSP LPR
- Page 26 and 27: [UMTS Setting] UMTS stands for Univ
- Page 28 and 29: To enable the DDNS function:1. Enab
- Page 30 and 31: 4.4 ManagementThe Management sectio
- Page 32 and 33: [Storage Settings]• Enable saving
- Page 34 and 35: 4.4.5 ToolsThis section allows you
- Page 38 and 39: 3. Click the Export Settings button
- Page 40 and 41: Relay OutputThe relay outputs on th
- Page 42: Country SupportAustralia, Austria,
5Advanced Applications5. Click <strong>the</strong> Firmware Upgrade tab. This dialog box appears.Figure 5-46. Click <strong>the</strong> Browse button to locate <strong>the</strong> firmware file (.img) saved at your local computer.7. If you like to upgrade all <strong>the</strong> <strong>GV</strong>-<strong>DSP</strong> <strong>LPR</strong> in <strong>the</strong> list, check Upgrade all video servers.8. Type Password, and click Upgrade to process <strong>the</strong> upgrade.5.2 Backing Up and Restoring SettingsWith <strong>the</strong> Utility included in <strong>the</strong> Software CD, you can back up <strong>the</strong> configurations in <strong>the</strong> <strong>GV</strong>-<strong>DSP</strong> <strong>LPR</strong>, and restore <strong>the</strong> backup data to <strong>the</strong> current unit or import it to ano<strong>the</strong>r unit.To back up <strong>the</strong> settings:1. Run Video Server Utility and locate <strong>the</strong> desired <strong>GV</strong>-<strong>DSP</strong> <strong>LPR</strong>. See Steps 1-3 in 5.1.2Upgrading Firmware by Using <strong>the</strong> Utility.2. Double-click <strong>the</strong> <strong>GV</strong>-<strong>DSP</strong> <strong>LPR</strong> in <strong>the</strong> list. Figure 5-3 appears.33
Change language