Chapter 3 Accessing the GV-DSP LPR

More documents

Recommendations

Info

4.4.5 ToolsThis section allows you to execute certain system operations and view the firmwareversion.Figure 4-14[Firmware Version] This section displays the firmware version of the GV-DSP LPR.[System Settings] Clicking the Load Default button will make the GV-DSP LPR restorefactory default settings. The Ready LED on the front panel will turn off. Wait until theReady LED turns on and then you can re-log in the GV-DSP LPR.Note: After applying default settings, you will need to configure the GV-DSP LPR’snetwork settings again.[Reboot] Clicking the Reboot button will make the GV-DSP LPR perform software reset.The Ready LED on the front panel will turn off. Wait until the Ready LED turns on and thenyou can re-log in the GV-DSP LPR.30
5Advanced ApplicationsChapter 5 Advanced ApplicationsThis chapter introduces more advanced applications.5.1 Upgrading System FirmwareGeoVision will periodically release the updated firmware on the website. The new firmwarecan be simply loaded into the GV-DSP LPR over LAN or by using the Video Server Utilityincluded in the Software CD.5.1.1 Upgrading Firmware over LAN1. In the Live View window, click the Firmware Upgrade button (No. 7, Figure 3-3). Thisdialog box appears.Figure 5-12. Click the Browse button to locate the firmware file (.img) saved at your local computer.3. Click the Upgrade button to process the upgrade.31
Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
Page 3 and 4: ContentsChapter 1 Introduction ....
Page 5 and 6: 1IntroductionChapter 1 Introduction
Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
Page 10 and 11: 1. Open your web browser, and type
Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
Page 14 and 15: 3.2.1 The Live View Window189234567
Page 16 and 17: 3.2.4 Video RecordingYou can record
Page 18 and 19: Chapter 4 Administrator ModeThe Adm
Page 20 and 21: [Video Signal Type] The GV-DSP LPR
Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
Page 24 and 25: 4.2.2 Output SettingThe GV-DSP LPR
Page 26 and 27: [UMTS Setting] UMTS stands for Univ
Page 28 and 29: To enable the DDNS function:1. Enab
Page 30 and 31: 4.4 ManagementThe Management sectio
Page 32 and 33: [Storage Settings]• Enable saving
Page 36 and 37: 5.1.2 Upgrading Firmware by Using t
Page 38 and 39: 3. Click the Export Settings button
Page 40 and 41: Relay OutputThe relay outputs on th
Page 42: Country SupportAustralia, Austria,

Chapter 3 Accessing the GV-DSP LPR

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?