Chapter 3 Accessing the GV-DSP LPR

More documents

Recommendations

Info

[Storage Settings]• Enable saving results on SD Card: Enable this option to save the recognition resultsor images onto the SD card.• Enable recycling: If this option is checked, the system will overwrite the oldest storedfiles when the space of the SD card is lower than the specified space. If this option isnot checked, the system will stop recording when the specified space is reached.Note:• The GV-DSP LPR doesn’t support SD High Capacity (SDHC) cards.• The SD card of 1G capacity can save approximately 30,000 captured images of D1resolution, and 120,000 captured images of CIF resolution. The SD card of 4Gcapacities can save approximately 120,000 captured images of D1 resolution, and480,000 captured images of CIF resolution.28
4Administrator Mode4.4.3 User AccountThe GV-DSP LPR has two types of password protection: Guest password for restrictingunwanted users from accessing the GV-DSP LPR, and Administrator password forrestricting who can enter privileged commands.Default Guest login name and password are guest. Default Administrator login name andpassword are admin.Figure 4-124.4.4 Log InformationThe log contains dump data that is used by service personnel for analyzing problems.Figure 4-1329
Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
Page 3 and 4: ContentsChapter 1 Introduction ....
Page 5 and 6: 1IntroductionChapter 1 Introduction
Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
Page 10 and 11: 1. Open your web browser, and type
Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
Page 14 and 15: 3.2.1 The Live View Window189234567
Page 16 and 17: 3.2.4 Video RecordingYou can record
Page 18 and 19: Chapter 4 Administrator ModeThe Adm
Page 20 and 21: [Video Signal Type] The GV-DSP LPR
Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
Page 24 and 25: 4.2.2 Output SettingThe GV-DSP LPR
Page 26 and 27: [UMTS Setting] UMTS stands for Univ
Page 28 and 29: To enable the DDNS function:1. Enab
Page 30 and 31: 4.4 ManagementThe Management sectio
Page 34 and 35: 4.4.5 ToolsThis section allows you
Page 36 and 37: 5.1.2 Upgrading Firmware by Using t
Page 38 and 39: 3. Click the Export Settings button
Page 40 and 41: Relay OutputThe relay outputs on th
Page 42: Country SupportAustralia, Austria,

Chapter 3 Accessing the GV-DSP LPR

Create successful ePaper yourself

Delete template?

Save as template?