Chapter 3 Accessing the GV-DSP LPR
Chapter 3 Accessing the GV-DSP LPR Chapter 3 Accessing the GV-DSP LPR
[Storage Settings]• Enable saving results on SD Card: Enable this option to save the recognition resultsor images onto the SD card.• Enable recycling: If this option is checked, the system will overwrite the oldest storedfiles when the space of the SD card is lower than the specified space. If this option isnot checked, the system will stop recording when the specified space is reached.Note:• The GV-DSP LPR doesn’t support SD High Capacity (SDHC) cards.• The SD card of 1G capacity can save approximately 30,000 captured images of D1resolution, and 120,000 captured images of CIF resolution. The SD card of 4Gcapacities can save approximately 120,000 captured images of D1 resolution, and480,000 captured images of CIF resolution.28
4Administrator Mode4.4.3 User AccountThe GV-DSP LPR has two types of password protection: Guest password for restrictingunwanted users from accessing the GV-DSP LPR, and Administrator password forrestricting who can enter privileged commands.Default Guest login name and password are guest. Default Administrator login name andpassword are admin.Figure 4-124.4.4 Log InformationThe log contains dump data that is used by service personnel for analyzing problems.Figure 4-1329
- Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
- Page 3 and 4: ContentsChapter 1 Introduction ....
- Page 5 and 6: 1IntroductionChapter 1 Introduction
- Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
- Page 10 and 11: 1. Open your web browser, and type
- Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
- Page 14 and 15: 3.2.1 The Live View Window189234567
- Page 16 and 17: 3.2.4 Video RecordingYou can record
- Page 18 and 19: Chapter 4 Administrator ModeThe Adm
- Page 20 and 21: [Video Signal Type] The GV-DSP LPR
- Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
- Page 24 and 25: 4.2.2 Output SettingThe GV-DSP LPR
- Page 26 and 27: [UMTS Setting] UMTS stands for Univ
- Page 28 and 29: To enable the DDNS function:1. Enab
- Page 30 and 31: 4.4 ManagementThe Management sectio
- Page 34 and 35: 4.4.5 ToolsThis section allows you
- Page 36 and 37: 5.1.2 Upgrading Firmware by Using t
- Page 38 and 39: 3. Click the Export Settings button
- Page 40 and 41: Relay OutputThe relay outputs on th
- Page 42: Country SupportAustralia, Austria,
[Storage Settings]• Enable saving results on SD Card: Enable this option to save <strong>the</strong> recognition resultsor images onto <strong>the</strong> SD card.• Enable recycling: If this option is checked, <strong>the</strong> system will overwrite <strong>the</strong> oldest storedfiles when <strong>the</strong> space of <strong>the</strong> SD card is lower than <strong>the</strong> specified space. If this option isnot checked, <strong>the</strong> system will stop recording when <strong>the</strong> specified space is reached.Note:• The <strong>GV</strong>-<strong>DSP</strong> <strong>LPR</strong> doesn’t support SD High Capacity (SDHC) cards.• The SD card of 1G capacity can save approximately 30,000 captured images of D1resolution, and 120,000 captured images of CIF resolution. The SD card of 4Gcapacities can save approximately 120,000 captured images of D1 resolution, and480,000 captured images of CIF resolution.28
Change language