Chapter 3 Accessing the GV-DSP LPR

More documents

Recommendations

Info

4.4 ManagementThe Management section includes the settings of data and time, SD card and useraccount. Also you can view the firmware version and execute certain system operations.4.4.1 Date & Time SettingYou can set up the date and time appearing in the image’s caption.Figure 4-10[Date & Time on LPR] Display the current date and time on the GV-DSP LPR.[Synchronized with a Network Time Server] Use the NTP server to automaticallyupdate the date and time of the GV-DSP LPR every 24 hours. Type the host name or theIP address of the NTP server for connection.[Synchronized with your computer or modify manually] Manually change the date andtime of the GV-DSP LPR. Or, synchronize the date and time of the GV-DSP LPR withthose of the local computer.26
4Administrator Mode4.4.2 Storage SettingsThe GV-DSP LPR has one SD card slot. You can store the recognition results or imagesto the SD card. The image is stored in the JPEG compressed format.Figure 4-11To add a SD card:1. Insert a SD card to the SD card slot.2. Click the Refresh button to detect the SD card. The total size, used size, free spaceand utilization of the SD card will be displayed. Note that it may take several secondsfor your web browser to update the information of the SD card.3. If you like to format the SD card or erase all data stored on it, click the Format button.To remove a SD card:1. Click the Remove button.2. When you are prompted to ensure the action, click Yes. The page will be refreshedand the displayed information of the will be cleaned.3. Remove the SD card from the SD card slot.Note: The captured images may be lost if you do not remove the SD card properly.27
Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
Page 3 and 4: ContentsChapter 1 Introduction ....
Page 5 and 6: 1IntroductionChapter 1 Introduction
Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
Page 10 and 11: 1. Open your web browser, and type
Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
Page 14 and 15: 3.2.1 The Live View Window189234567
Page 16 and 17: 3.2.4 Video RecordingYou can record
Page 18 and 19: Chapter 4 Administrator ModeThe Adm
Page 20 and 21: [Video Signal Type] The GV-DSP LPR
Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
Page 24 and 25: 4.2.2 Output SettingThe GV-DSP LPR
Page 26 and 27: [UMTS Setting] UMTS stands for Univ
Page 28 and 29: To enable the DDNS function:1. Enab
Page 32 and 33: [Storage Settings]• Enable saving
Page 34 and 35: 4.4.5 ToolsThis section allows you
Page 36 and 37: 5.1.2 Upgrading Firmware by Using t
Page 38 and 39: 3. Click the Export Settings button
Page 40 and 41: Relay OutputThe relay outputs on th
Page 42: Country SupportAustralia, Austria,

Chapter 3 Accessing the GV-DSP LPR

Create successful ePaper yourself

Delete template?

Save as template?