Chapter 3 Accessing the GV-DSP LPR

More documents

Recommendations

Info

4.2.2 Output SettingThe GV-DSP LPR can connect up to 4 output devices, e.g. alarms. There are six outputsignals are available: N/O (Open Circuit), N/C (Grounded Circuit), N/O Toggle, N/C Toggle,N/O Pulse and N/C Pulse. Choose the one that mostly suits the device you are using. Setthe pulse duration for the pulse mode.Figure 4-64.3 NetworkThe Network section includes some basic but important network configurations that enablethe GV-DSP LPR to be connected to a TCP/IP network.4.3.1 LANAccording to your network environment, select among Static IP, DHCP, PPPoE and UMTS.20
4Administrator ModeFigure 4-7[LAN Configuration]• Dynamic IP address: The network environment has a DHCP server. This optionshould only be enabled if you know which IP address the GV-DSP LPR will get fromthe DHCP server, or you have obtained a domain name from the DDNS serviceprovider.• Static IP address: Assign a static IP or fixed IP to the GV-DSP LPR. Type TCP/IP andDNS parameters of the unit in the Configure connection parameters section.• PPPoE: The Network environment is xDSL connection. Type the Username andPassword provided by ISP to establish the connection. If you use the xDSLconnection with dynamic IP addresses, you must use the DDNS function to obtain adomain name linked to the changing IP address of the GV-DSP LPR first.21
Page 1 and 2: GV-DSP LPRUser's Manual V1.0Before
Page 3 and 4: ContentsChapter 1 Introduction ....
Page 5 and 6: 1IntroductionChapter 1 Introduction
Page 8 and 9: 1.4.2 Rear View1 2 34Figure 1-2No.
Page 10 and 11: 1. Open your web browser, and type
Page 12 and 13: Chapter 3 Accessing the GV-DSP LPRT
Page 14 and 15: 3.2.1 The Live View Window189234567
Page 16 and 17: 3.2.4 Video RecordingYou can record
Page 18 and 19: Chapter 4 Administrator ModeThe Adm
Page 20 and 21: [Video Signal Type] The GV-DSP LPR
Page 22 and 23: 4.1.3 LPR CenterWhen the alarm even
Page 26 and 27: [UMTS Setting] UMTS stands for Univ
Page 28 and 29: To enable the DDNS function:1. Enab
Page 30 and 31: 4.4 ManagementThe Management sectio
Page 32 and 33: [Storage Settings]• Enable saving
Page 34 and 35: 4.4.5 ToolsThis section allows you
Page 36 and 37: 5.1.2 Upgrading Firmware by Using t
Page 38 and 39: 3. Click the Export Settings button
Page 40 and 41: Relay OutputThe relay outputs on th
Page 42: Country SupportAustralia, Austria,

Chapter 3 Accessing the GV-DSP LPR

Create successful ePaper yourself

Delete template?

Save as template?