Chapter 3 Accessing the GV-DSP LPR

4.1.3 LPR CenterWhen the alarm events of motion detection and sensor trigger occur, the LPR Center canget alerts by recognition results and captured images.Figure 4-4[LPR Name Setting] Type a descriptive name for the GV-DSP LPR.[Period of Connection Checking] Set the time interval in seconds of each reconnectionattempt.[Connection Port Settings] Both of POS Port and POS ACK Port are used fortransmitting the recognition result to GV-DVR System. The default port numbers are 4000and 3999 respectively. The LPR Live Center Port is used for displaying the recognitionresult on the live view. When you want to access more than one GV-DSP LPR on thebrowser screen, set different LPR Live Center Ports for each GV-DSP LPR; otherwise youcannot see the recognition result on the live view.[Center Remote Control] Select outputs allowed to be triggered by the LPR Centerremotely.[Center IP Setting] Connect the GV-DSP LPR to the LPR Center for central monitoring.The maximum of 8 LPR Centers can be connected at one time.18