GV-Video Server

More documents

Recommendations

Info

1. Open your web browser, and type the default IP address http://192.168.0.102. In both Login and Password fields, type the default value admin. Click Apply.3. In the left menu, select Network and then LAN to begin the network settings.Figure 2-24. Select Static IP address. Type IP Address, Subnet Mask, Router/Gateway, PrimaryDNS and Secondary DNS in the Configure connection parameters section.5. Click Apply. The GV-Video Server is accessible by entering the assigned IP addresson the web browser.IMPORTANT:• Dynamic IP Address and PPPoE should only be enabled if you know which IPaddress the GV-Video Server will get from the DHCP server or ISP. Otherwise,you must use the Dynamic DNS service to obtain a domain name linked to theGV-Video Server’s changing IP address first.For details on Dynamic DNS Server settings, see 4.7.3 Advanced TCP/IP.• If Dynamic IP Address and PPPoE is enabled and you cannot access the unit,you may have to reset it to the factory default settings and then perform thenetwork settings again.To restore the factory settings, see the Default button in 1.5.1 Front View.14
2Getting Started2.3 Configuration BasicsOnce the GV-Video Server is properly installed, the following important features can beconfigured using the browser-based configuration page and are discussed in the followingsections in this manual:• Date and time adjustment: see 4.8.1 Date and Time Settings.• Login and privileged passwords: see 4.8.4 User Account.• Network gateway: see 4.7 Network.• Camera image adjustment: see 3.2.2 The Control Panel of the Live View Window.• Video format, resolution and frame rate: see 4.1.2 Video Settings.15
Page 1 and 2: GV-Video ServerUser's ManualBefore
Page 3 and 4: PrefaceWelcome to the GV-Video Serv
Page 5 and 6: 3.2.13 I/O Control.................
Page 7 and 8: 7.2 Receiving Cardholder Data from
Page 10 and 11: 1.1.3 GV-VS12Figure 1-31. AC Power
Page 12 and 13: 1.5 OptionsOptional devices can exp
Page 14 and 15: 1.6.1.2 GV-VS02A8761 2 3 4 5Figure
Page 16 and 17: 1.6.1.4 GV-VS04AFigure 1-8No. NameF
Page 18 and 19: 1.6.2.2 GV-VS02AFigure 1-10No. Name
Page 20 and 21: 1.6.2.4 GV-VS04AFigure 1-12No. Name
Page 24 and 25: Chapter 3 Accessing the GV-Video Se
Page 26 and 27: 1110981 2 3 4 5 6 7Figure 3-3No. Na
Page 28 and 29: 3.2.3 Snapshot of a Live VideoTo ta
Page 30 and 31: Picture-and-Picture ViewWith the Pi
Page 32 and 33: • Auto Snapshot: The snapshot of
Page 34 and 35: 3.2.11 PTZ ControlTo open the PTZ c
Page 36 and 37: 3.2.13 I/O ControlThe I/O Control w
Page 38 and 39: Chapter 4 Administrator ModeThe Adm
Page 40 and 41: 4.1 Video & MotionThis section incl
Page 42 and 43: 4.1.2 Video SettingsFigure 4-334
Page 44 and 45: [Video Signal Type]• Auto detect
Page 46 and 47: 4.1.3 Motion DetectionMotion detect
Page 48 and 49: 4.1.5 Text OverlayNote this option
Page 50 and 51: To configure the tampering alarm:1.
Page 52 and 53: 4.1.8 Video Channel Source Settings
Page 54 and 55: 4.2.2 Input/Output SettingsInput Se
Page 56 and 57: 4.2.3 GPS/WiegandYou can select eit
Page 58 and 59: 4.2.4 BuzzerNote this function is o
Page 60 and 61: • Send to: Type the e-mail addres
Page 62 and 63: [Alarm Settings]• Motion Detectio
Page 64 and 65: To enable the Center V2 connection:
Page 66 and 67: 3. Port Number: Match the port to P
Page 68 and 69: To enable the GV-GIS connection:1.
Page 70 and 71: 3. Port Number: Match the communica
Page 72 and 73:
4.3.8 ViewLog ServerThe ViewLog Ser
Page 74 and 75:
4.5 Recording ScheduleThe schedule
Page 76 and 77:
4.7 NetworkThe Network section incl
Page 78 and 79:
4.7.2 Wireless-Client ModeTo use th
Page 80 and 81:
4.7.3 Advanced TCP/IPThis section i
Page 82 and 83:
4.7.4 UMTSUMTS stands for Universal
Page 84 and 85:
Figure 4-34• Multicast Host Name:
Page 86 and 87:
4.8 ManagementThe Management sectio
Page 88 and 89:
4.8.2 GPS Maps SettingsNote this fu
Page 90 and 91:
• Keep days (1-255): Specify the
Page 92 and 93:
4.8.5 Log InformationThe System Boo
Page 94 and 95:
4.8.7 ToolsThis section allows you
Page 96 and 97:
5.2.1 Playback Using USB Mass Stora
Page 98 and 99:
5.2.3 Playback of GPS TracksOn GV-S
Page 100 and 101:
5.2.4 Playback of Daylight Saving T
Page 102 and 103:
6.1.1 Using the Web Interface1. In
Page 104 and 105:
5. Click the Firmware Upgrade tab.
Page 106 and 107:
6.3 GPS TrackingNote this function
Page 108 and 109:
6.4 Restoring to Factory Default Se
Page 110 and 111:
6.5.3 The Watermark Proof Window1 3
Page 112 and 113:
7.1 Setting Up IP CamerasTo set up
Page 114 and 115:
Previewing Video and Setting AudioT
Page 116 and 117:
[GV-GIS Setting]Receive the GPS dat
Page 118 and 119:
2. At the local computer, open the
Page 120 and 121:
For details on creating an E-Map fi
Page 122 and 123:
To define how to display the receiv
Page 124 and 125:
8.3 Dispatch ServerThe Dispatch Ser
Page 126 and 127:
9.1.2 Relay OutputThe relay outputs
Page 128 and 129:
9.2.2 RS-232 Terminal BlockThe RS-2
Page 130 and 131:
10.1 PDAGView V2 is a remote view a
Page 132 and 133:
2. Click the button located at the
Page 134 and 135:
10.1.5 Other FunctionsIn addition t
Page 136 and 137:
Viewing Input-Triggered EventsAll i
Page 138 and 139:
Viewing Camera StatusTo view the ca
Page 140 and 141:
10.2.3 Connecting to GV-Video Serve
Page 142 and 143:
10.2.4 Playing Back the Recordings
Page 144 and 145:
10.3.3 Connecting to GV-Video Serve
Page 146 and 147:
10.4 3G Mobile PhoneWithout install
Page 148 and 149:
4. Select Live to receive the Live
Page 150 and 151:
SpecificationsVideoModel GV-VS02 GV
Page 152 and 153:
EnvironmentModel GV-VS02 GV-VS02A G
Page 154:
C. Settings for Internet Explore 8I
show all

GV-Video Server

Create successful ePaper yourself

Delete template?

Save as template?