Contents

Maintain the 3400 and 5400NThis section provides maintenance information for the 3400 and 5400N systems, including the integrated Everest 400printer.--Important! For optimum performance, keep the 3400 and 5400N in a clean, dust-free environment.OverviewRegular preventative maintenance of your system can help to ensure error-free recordings and clean printed labels.Maintenance also involves cleaning the system.Cautionary InformationnnCaution: To avoid damaging the 3400 or 5400N during maintenance:• Never use oils, silicone, or other lubricants on any part of the system.• Use only non-abrasive cleaners to wipe down the surfaces of your autoloader.• Never use cleaners to clean the embedded PC.• Avoid pouring cleaners directly onto the autoloader. Instead, apply the cleaner a clean, lint-free cloth.• Observe precautions for electrostatic-sensitive devices whenever you access the embedded PC.Preventative MaintenanceYou must perform routine maintenance to keep the system operating at optimum performance. The PreventativeMaintenance Schedule on page 36 lists maintenance tasks, task frequency, and references to cleaning instructions in this userguide.--Important! Failure to follow the maintenance schedule may void your warranty.Note: Your system may require more frequent maintenance if used in a dusty area, such as a store or warehouse.Before you begin:1. Power off the autoloader.2. If you have a 5400N, power off the embedded PC.3. Disconnect the power cord.4. Follow the Preventative Maintenance Schedule on page 36.2001431_B35