Contents

Install the Print Ribbon1. Remove the new print ribbon from the packaging.2. Install the print ribbon on the print ribbon carrier.--Important! When you install the new print ribbon on the carrier, do not rotate the ribbon past the black cleaningbars. When the new ribbon is installed in the integrated Everest 400 printer, the ribbon advances and the bars cleanthe print head.a. With the supply roll on the right side, unwind several inches of the new print ribbon.b. Place the print ribbon on a clean, flat surface.c. Place the print ribbon carrier on top of the print ribbon.Tip: To keep the print ribbon carrier in place while you install the print ribbon, position the carrier so that thetab rests on the edge of a table or workspace.New Take-Up RollNew Supply RollTabd. Bring the supply roll up and around the tacky rollerand guide rollers on the right side of the carrier.e. Press down to install the supply roll, as shown.Supply Rollf. Bring the take-up roll up and around theguide roller on the left side of the carrierg. Press down to install the take-up roll, asshown.Take-UpRollGuideRollerTackyRollerGuideRoller2001431_B29