Contents
Professional 3400 und 5400N Professional 3400 und 5400N
Place a Disc on the Printer TrayUse this procedure to manually place a disc on the printer tray.1. Press the printer tray button on the control panel. Theprinter tray opens.2. Place the disc on the print pad with the printable surfacefacing up and the stacking ring facing the print pad.3. Press the printer tray button. The printer tray closes.--Important! To avoid scratching or damaging therecording surface of the disc, the disc must not rest onthe holding pins or the centering pin.Holding PinsPlace a Disc on the Recorder TrayUse this procedure to manually place a disc on the recorder tray.1. Press the recorder button on the recorder you wish toopen. The recorder tray opens.2. Place the disc on the recorder tray with the printablesurface facing up.3. Press the recorder button. The recorder tray closes.2001431_B21
Set Your Printing Preferences on a Windows PCThis section provides the information needed to set up your printing preferences and check the amount of print andretransfer ribbon remaining using a Windows PC. Printing preferences allow you to set up the integrated Everest 400 printerto produce the best possible labels on your discs.Note: Unless otherwise indicated, all Windows navigation statements are Windows XP paths. Other Windows operatingsystem navigation may differ slightly.Access Printing PreferencesUse one of the procedures below to access the Everest 400 Printing Preferences window.Access Printing Preferences through the Windows Start MenuNote: When you use this method, the printing preferences are saved in the printer driver settings and are applied to allnewly created labels.1. Select: Start > Printers and Faxes.2. Right-click the Rimage Everest 400 printer. The dropdown menu displays.3. From the dropdown menu, select Printing Preferences. The Rimage Everest 400 Printing Preferences dialog box opens.Access Printer Preferences through CD DesignerNote: When you use this method, the printing preferences are saved with the label file and are used instead of theprinter driver settings.1. Open the desired label file in CD Designer.2. From the File menu, select Print. The Print window opens.3. From the Name dropdown list, select the Rimage Everest 400 printer.Note: The Rimage Everest 400 printer may display as the default printer.4. Select the Document Properties button. The Rimage Everest 400 Properties dialog box opens.Access Printer Preferences for Printing PDF FilesUse the procedure below to access printing preferences for PDF files.--Important! When you use this procedure, the changes to the settings are global and apply to all PDF labels.1. Select: Start > Printers and Faxes.2. Right-click on the Everest 400 printer. The dropdown menu displays.3. From the dropdown menu, select Properties. The Rimage Everest 400 Properties dialog box opens.4. From the Rimage Everest 400 Properties dialog box, select the Advanced tab.5. At the bottom of the Advanced tab, select Printing Defaults… The Rimage Everest 400 Printing Defaults dialog boxopens.2001431_B23
- Page 4 and 5: Rimage Professional 3400 and 5400N
- Page 6 and 7: Rimage Professional 3400 and 5400N
- Page 8 and 9: Rimage Professional 3400 and 5400N
- Page 10 and 11: Rimage Professional 3400 and 5400N
- Page 13 and 14: Printer RequirementsThis section de
- Page 15 and 16: Identify the Parts of the Professio
- Page 17 and 18: Parts InformationControl PanelThe c
- Page 19: Rimage Professional 3400 and 5400N
- Page 23 and 24: c. To modify only Standard Area set
- Page 25 and 26: Rimage Professional 3400 and 5400N
- Page 27 and 28: Rimage Professional 3400 and 5400N
- Page 29 and 30: Rimage Professional 3400 and 5400N
- Page 31 and 32: Maintain the 3400 and 5400NThis sec
- Page 33 and 34: Clean the Everest 400 PrinterRegula
- Page 35 and 36: 4. Inside the printer, use the spon
- Page 37 and 38: Rimage Professional 3400 und 5400NB
- Page 39 and 40: InhaltEinführung..................
- Page 41 and 42: EinführungIn diesem Handbuch erhal
- Page 43 and 44: Wichtige InformationenIn diesem Abs
- Page 45 and 46: Länderspezifische Sicherheits- und
- Page 47 and 48: 3400 5400NPC-AnforderungenMindestan
- Page 49 and 50: Grafikdesign-AnforderungenIn diesem
- Page 51 and 52: Ansicht und Bedienelemente des Prof
- Page 53 and 54: Bedienungs- und AnzeigeelementeBedi
- Page 55 and 56: Rimage Professional 3400 und 5400N
- Page 57 and 58: Festlegen der Druckeinstellungen au
- Page 59 and 60: ii. Wählen Sie den gewünschten In
- Page 61 and 62: Rimage Professional 3400 und 5400N
- Page 63 and 64: Rimage Professional 3400 und 5400N
- Page 65 and 66: Rimage Professional 3400 und 5400N
- Page 67 and 68: Wartung der Modelle 3400 und 5400NI
- Page 69 and 70: Reinigen des Druckers Everest 400Du
Place a Disc on the Printer TrayUse this procedure to manually place a disc on the printer tray.1. Press the printer tray button on the control panel. Theprinter tray opens.2. Place the disc on the print pad with the printable surfacefacing up and the stacking ring facing the print pad.3. Press the printer tray button. The printer tray closes.--Important! To avoid scratching or damaging therecording surface of the disc, the disc must not rest onthe holding pins or the centering pin.Holding PinsPlace a Disc on the Recorder TrayUse this procedure to manually place a disc on the recorder tray.1. Press the recorder button on the recorder you wish toopen. The recorder tray opens.2. Place the disc on the recorder tray with the printablesurface facing up.3. Press the recorder button. The recorder tray closes.2001431_B21