ATTO ExpressSAS Host and RAID Adapter Installation and Operation Manual
ATTO ExpressSAS Host and RAID Adapter Installation and ... ATTO ExpressSAS Host and RAID Adapter Installation and ...
GlossaryAppendix A GlossarySome terms used in the SAS/SATA industry are defined below. More information is available through theATTO Technology website (www.attotech.com), or the Storage Area Networking Industry Association(www.snia.org).TermDefinitionANSIAmerican National Standards InstituteAuto Negotiation Hardware senses and automatically responds depending on configurationBit Smallest unit of data a computer can process: a single binary digit with a value of either 0 or 1BusA collection of unbroken signal lines used to transmit information from one part of a computersystem to another; taps on the lines connect devices to the busByteAn ordered set of 8 bitsCPUCentral Processing Unit: the portion of the computer that actually performs computationsDevice Driver A program that allows a microprocessor to direct the operation of a peripheral deviceDMADirect Memory Access: a way to move data from a storage device directly to RAM without usingthe CPU’s resourcesDMA bus master Allows a peripheral to control the flow of data to and from system memory by block as opposed toallowing the processor to control the data by bytes (PIO or programmed I/O)HostA processor, usually a CPU and memory, which communicates with devices over an interfaceI2CI2C HeaderLEDParity CheckingPCIPHYPortPort AddressPort NumberSCSISEPSES(Inter-Integrated Circuit) is a multi-master serial single-ended computer bus that is used to attachlow-speed peripherals to a motherboard, backplane or embedded systemI2C header is a connector on the adapter used to connect an I2C cableLight-emitting diode: a type of diode that emits light when current passes through it; visible LEDsare used as indicator lights on all sorts of electronic devicesA method which verifies the accuracy of data transmitted over the SCSI bus by adding one bit inthe transfer to make the sum of all the bits either odd or even (for odd or even parity); an errormessage occurs if the sum is not correctPeripheral Component Interconnect. Allows peripherals to be connected directly to computermemory, bypassing the slower ISA and EISA bussesA physical connection between the adapter and a drive on the backplane. Each mini-SASconnector carries signals for four physAn access point in a deviceAlso port number; the address, assigned by the PCI bus, through which commands are sent to ahost adapter boardSee port addressSmall Computer Systems Interface: a processor-independent standard for system-level interfacebetween a computer and intelligent devices including hard disks, floppy disks, CD-ROM, printers,scanners, etc.SCSI Enclosure Process. A SEP is a device, typically a backplane, that is capable of executingSCSI SES commandsSCSI Enclosure Services. A SCSI specification that defines SCSI commands for controlling anenclosure. These commands include the capability to control LED indicators on an enclosurei ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
TermSES-I2CSGPIOSidebandConnectorTransfer RateDefinitionSES over I2C. I2C is used to transport the SES protocol instead of SCSI, SAS, Fibre Channel etcA serial GPIO protocol used to control LED indicators on a backplaneConnector on Mini-SAS cables used to carry an SGPIO signalThe rate at which bytes or bits are transferred, as in megabytes or gigabits per secondii ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
- Page 1 and 2: ATTO ExpressSAS Host and RAID Adapt
- Page 3 and 4: Contents1 ATTO Provides Storage Sol
- Page 5 and 6: 1 ATTO Provides Storage SolutionsAT
- Page 7 and 8: H60F technical specifications• 16
- Page 9 and 10: R608 technical specifications• Ei
- Page 11 and 12: WindowsInstalling from the ExpressS
- Page 13 and 14: VMware ESX/ESXi 4.1 (ExpressSAS H6x
- Page 15 and 16: 2.1 New Windows OS InstallationWhen
- Page 17 and 18: 2.2 New OS X InstallationBoot suppo
- Page 19 and 20: 3 Install HardwareUse this chapter
- Page 21 and 22: Installing CacheAssure (6Gb RAID Ad
- Page 23 and 24: Bracket detailsExhibit 3-4 ExpressS
- Page 25 and 26: Exhibit 3-12 ExpressSAS R680 Adapte
- Page 27 and 28: Exhibit 3-18 ExpressSAS H6F0 Adapte
- Page 29 and 30: Exhibit 3-23 ExpressSAS R60F Adapte
- Page 31 and 32: Connections on the R608 and R60FThe
- Page 33 and 34: Exhibit 3-3 Connect an H608 or H60F
- Page 35 and 36: Exhibit 3-4SES-I2C Wire chart for R
- Page 37 and 38: Example ConfigurationsExample 1 R60
- Page 39: 4 TroubleshootingThis chapter conta
- Page 43 and 44: PARAMETERDESCRIPTIONnum_targets Max
- Page 45 and 46: Appendix C Standards and Compliance
TermSES-I2CSGPIOSideb<strong>and</strong>ConnectorTransfer RateDefinitionSES over I2C. I2C is used to transport the SES protocol instead of SCSI, SAS, Fibre Channel etcA serial GPIO protocol used to control LED indicators on a backplaneConnector on Mini-SAS cables used to carry an SGPIO signalThe rate at which bytes or bits are transferred, as in megabytes or gigabits per secondii <strong>ATTO</strong> Technology Inc. <strong>ATTO</strong> <strong>ExpressSAS</strong> <strong>Host</strong> & <strong>RAID</strong> <strong>Adapter</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> <strong>Manual</strong>