ATTO ExpressSAS Host and RAID Adapter Installation and Operation Manual
ATTO ExpressSAS Host and RAID Adapter Installation and ...
ATTO ExpressSAS Host and RAID Adapter Installation and ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.1 Data Path <strong>and</strong> LED ControlThis chapter provides the instructions that define the internal cable connections for data path <strong>and</strong> LED control,needed for hard drive backplanes. This section applies to the following models: R608; R60F; H608; <strong>and</strong> H60F.These adapters have been designed to affect LED Control functionality through an SGPIO interface or an I2Cinterface. These interfaces require different cable connections <strong>and</strong> those connections are specified in thischapter.Connections on the H608 <strong>and</strong> H60FThe following diagrams show the connections for Mini-SAS cables <strong>and</strong> I2C cables on the H608 <strong>and</strong> H60F.Exhibit 3.1-1 H608 connectorsExhibit 3.1-2 H60F connectors28 <strong>ATTO</strong> Technology Inc. <strong>ATTO</strong> <strong>ExpressSAS</strong> <strong>Host</strong> & <strong>RAID</strong> <strong>Adapter</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> <strong>Manual</strong>
Change language