ATTO ExpressSAS Host and RAID Adapter Installation and Operation Manual
ATTO ExpressSAS Host and RAID Adapter Installation and ...
ATTO ExpressSAS Host and RAID Adapter Installation and ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Exhibit 3-23 <strong>ExpressSAS</strong> R60F <strong>Adapter</strong> board..Install storage1 Connect your SAS/SATA storage to the <strong>ATTO</strong><strong>ExpressSAS</strong> adapter.NoteConsult with your storage vendor for theproper connectors <strong>and</strong> cables to interfacewith your storage• External connectors: useSFF-8088 connectors.• External connectors: useSFF-8644 mini-SAS HDconnectors (GT only).• Internal connectors: useSFF-8087 internalconnectors.• For SATA, use cables whichare no longer than 1 meter.• For SAS, use cables whichare no longer than 7 meters.2 Plug in your computer <strong>and</strong> storage <strong>and</strong> powerthem on.3 If required, configure your storage <strong>and</strong> adapter,including <strong>RAID</strong>, using the <strong>ATTO</strong> ConfigToolfound in <strong>ATTO</strong> Utilities on the <strong>Installation</strong> CD orthe <strong>ATTO</strong> web site. Default settings areappropriate for most systems but you maychange settings using the <strong>ATTO</strong> ConfigTool.25 <strong>ATTO</strong> Technology Inc. <strong>ATTO</strong> <strong>ExpressSAS</strong> <strong>Host</strong> & <strong>RAID</strong> <strong>Adapter</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> <strong>Manual</strong>
Change language