ATTO ExpressSAS Host and RAID Adapter Installation and Operation Manual

More documents

Recommendations

Info

2 Install DriversATTO ExpressSAS host adapters require a current device driver and hardware flash for proper operation.Your adapter was properly flashed before shipment.However, you must add ExpressSAS drivers to yourcomputer before continuing with installation.If you already have one or more ExpressSAS adaptersinstalled and you have the latest drivers found on theATTO web site, or you followed the instructions in theGetting Started Guide, you do not need to perform anyof these procedures.Drivers for Windows, OS X and Linux are supplied onthe Installation CD and on the ATTO web site.Exhibit 2-1 The Installation CD splash screen. for the ExpressSAS RAID host adapter.Downloading drivers from the ATTO websiteUse this procedure if you need to update drivers. Thelatest driver for your adapter can be found on theATTO website.1 Go to www.attotech.com.2 On the splash screen menu, put your cursorover Downloads then click on ProductDownloads.3 Register or log in if previously registered.4 Select SAS/SATA Host & RAID Adaptersfrom the product list.5 Select your model.6 From the table, find your Operating System.7 Click on the entry for the latest driver.8 A download window appears. Follow theinstructions for downloading the driver.Internet Explorer users may select Run toautomatically run the downloaded selfextractingexecutable file.All other browser users select a downloaddestination and run the self-extractingexecutable file.9 Continue with the driver installation asdescribed on the following pages for yourOperating System.6 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
WindowsInstalling from the ExpressSASInstallation CD1 Power on your system.2 Log on to Windows as the systemadministrator.3 Insert the Installation CD into a CD or DVDdrive. The CD begins automatically anddisplays the Installation Guide. If the CD failsto begin automatically, navigate to the root ofthe CD, and run Autorun.bat.4 Select Windows Drivers from the items on theleft side of the screen.5 Select the appropriate CPU-based operatingsystem from the operating system choices. Ifyou do not know which version to select,contact your system administrator or refer toyour operating system manual.6 Select Install Windows Driver.For Windows 7, Vista and Server 2008: If youhave User Account Control enabled, you areasked for permission for the installer tocontinue. If you do not have administratorprivileges, you are also asked for anadministrator user name and password.complete the required fields and clickContinue.7 Click Install.8 Follow the on-screen instructions to completethe driver installation.9 Continue on to Install Hardware on page 15.Installing from the ATTO Technologywebsite1 Power on your system.2 Log on to Windows as the systemadministrator.3 Follow the instructions in Downloading driversfrom the ATTO website on page 6.For Windows 7, Vista and Server 2008: If youhave User Account Control enabled, you areasked for permission for the installer tocontinue. If you do not have administratorprivileges, you are also asked for anadministrator user name and password. Fulfillthe required fields and click Continue.4 Click unzip. The driver files are extracted andthe driver installer is launched.5 Click Install.6 Follow the on-screen instructions to completethe driver installation.7 Continue on to Install Hardware on page 15.Installing from a directory containing theExpressSAS driver1 Power on your system.2 Log on as the system administrator.3 Navigate to the directory containing theExpressSAS driver.4 Run Setup.exe.For Windows 7, Vista and Server 2008: If youhave User Account Control enabled, you areasked for permission for the installer tocontinue. If you do not have administratorprivileges, you are also asked for anadministrator user name and password. Fulfillthe required fields and click Continue.5 Click Install.For Windows 7, Vista and Server 2008: If youhave User Account Control enabled, you areasked for permission for the installer tocontinue. If you do not have administratorprivileges, you are also asked for anadministrator user name and password. Fulfillthe required fields and click Continue.6 Follow the on-screen instructions to completethe installation.7 Continue on to Install Hardware on page 15.OS X1 Power on your system.2 Insert the Installation CD.3 After it mounts, open the ExpressSAS volume.4 Select the Drivers folder.5 Launch the installer.6 Follow the on-screen instructions.7 Continue on to Install Hardware on page 15.7 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
Page 1 and 2: ATTO ExpressSAS Host and RAID Adapt
Page 3 and 4: Contents1 ATTO Provides Storage Sol
Page 5 and 6: 1 ATTO Provides Storage SolutionsAT
Page 7 and 8: H60F technical specifications• 16
Page 9: R608 technical specifications• Ei
Page 13 and 14: VMware ESX/ESXi 4.1 (ExpressSAS H6x
Page 15 and 16: 2.1 New Windows OS InstallationWhen
Page 17 and 18: 2.2 New OS X InstallationBoot suppo
Page 19 and 20: 3 Install HardwareUse this chapter
Page 21 and 22: Installing CacheAssure (6Gb RAID Ad
Page 23 and 24: Bracket detailsExhibit 3-4 ExpressS
Page 25 and 26: Exhibit 3-12 ExpressSAS R680 Adapte
Page 27 and 28: Exhibit 3-18 ExpressSAS H6F0 Adapte
Page 29 and 30: Exhibit 3-23 ExpressSAS R60F Adapte
Page 31 and 32: Connections on the R608 and R60FThe
Page 33 and 34: Exhibit 3-3 Connect an H608 or H60F
Page 35 and 36: Exhibit 3-4SES-I2C Wire chart for R
Page 37 and 38: Example ConfigurationsExample 1 R60
Page 39 and 40: 4 TroubleshootingThis chapter conta
Page 41 and 42: TermSES-I2CSGPIOSidebandConnectorTr
Page 43 and 44: PARAMETERDESCRIPTIONnum_targets Max
Page 45 and 46: Appendix C Standards and Compliance

ATTO ExpressSAS Host and RAID Adapter Installation and Operation Manual

Create successful ePaper yourself

Delete template?

Save as template?