Nagpur Veterinary college, Nagpur - Maharashtra Animal & Fishery ...

Nagpur Veterinary college, NagpurTender NoticeOutward No. NVC/MED/TVCC/ 5071/13 Date 07.03.13The office of the Associate Dean, Nagpur Veterinary College, Nagpur intends to purchasehospital / laboratory equipment/instruments for the project “Critical Care Unit” . The tender formwill be available for sale from 08/03/13 during office hours on payment of Rs.1000/-. The lastdate of sale of tender form shall be 28/03/13 up to 13.00 hrs and submission of tender form shallbe 28 /03/13 up to 14.00 hrs. For details please log on to University website i.e. www. mafsu. inAssociate DeanNagpur Veterinary College, Nagpur

T E N D E R F O R MNagpur Veterinary College, Nagpur-440006TENDER FOR SUPPLY OF HOSPITAL AND LABORATORYINSTRUMENTS / EQUIPMENTS, ETC.MAHARASHTRA ANIMAL & FISHERY SCIENCESUNIVERSITY, NAGPUR – 6March 8 th , 2013

Nagpur Veterinary College, NagpurT E N D E R N O T I C EThe office of the Associate Dean, Nagpur Veterinary College intends to purchasethe some hospital / laboratory equipments. The manufacturers/ authorized dealers /distributors dealing these equipments are herby informed that the details ofequipments & specifications to be purchased is available on the universitywebsite www.mafsu.in as well as in the office of the Associate Dean, NagpurVeterinary College, Nagpur 440006 (M.S.). Tender form can be obtained fromthe office of the Associate Dean, Nagpur Veterinary College, Seminary hills,Nagpur 440006 (M.S.) on working days between 10.00 am to 05.00 pm onpayment of Rs.1000/- (Rs.One Thousand only) in cash or in the form of D.D./Banker’s cheque of any Nationalized bank in the name of ‘PAO,HQNVC.Nagpur, payable at Nagpur . Alternatively the complete form can bedownloaded from the university website http://www.mafsu.in and submitting aDD of Rs.1000/- towards the tender form fees. The last date for purchase of theblank tender form is 28/03 /13 till 13.00 hrs. If blank tender documents arerequired by post, the firm will have to send self addressed envelop (9X13”)bearing postal stamp of Rs. 60/- along with crossed demand draft for Rs. 1000/-(Rupees One Thousand only) in favor of ‘PAO,HQ NVC.Nagpur, payable atState Bank of India, Nagpur. However, this office will not be responsible for anypostal delay or non-receipt of the tender form. The last date for submission offilled in tender form is 28/03/2013 till 14.00 hrs. The tenders will be opened on28/03/2013 at 14.30 in the office of the Associate Dean, Nagpur VeterinaryCollege, Nagpur 440006 (M.S.)..Associate Dean,NVC, Nagpur.

Nagpur Veterinary College,Nagpur 440006No. NVC/MED/TVCC/ 5071/13 Date: 07/03/13Tender form No.DD / Banker’s Cheque No and dateAmount Rs. /-To M/s …………………….………………………….………………………….Sub : Tender FormRef : Your letter No. . …………………………. Date ………….Sir,This office is in receipt of Rs.1000/- by Cash/Demand Draft /Banker’scheque towards purchase of blank tender form for the supply of laboratoryequipments required for the "Critical Care Unit"project. I am enclosing herewith the set of tender form as desired by you.The earnest money deposit (EMD) prescribed for the above mentionedquotations shall be @ 1 % of the value of the hospital / laboratory equipmentquoted by the bidder.You are requested to go through the terms and conditions of the tenderbefore filling the tender form. The following points may be noted while submittingthe tender form.The EMD as prescribed above should be submitted in the forms of DD /Banker’s cheque drawn in favour of the PAO,HQ NVC.Nagpur payable atNagpur and should be enclosed with the tender form.The tender form should be submitted in the two separate sealed envelops 01and 02 both the envelopes should be super scribed as Envelope 01 and 02.

Envelope 1- Technical details:a. 1% EMD for Rs…………….. in the form of Demand Draft ofNationalized Bank drawn in favour of PAO,HQ NVC.Nagpur (EMDexemption will be given if the valid certificate is enclosed).b. Technical specifications consisting of all technical details along withcommercial terms & conditions.c. Product Literature / leaflets consist of detailed description of goodsessentially technical and performance characteristics.d. Manufacturer’s Authorization Certificate in case the tenderer is quoting asan authorized dealer/ supplier on behalf of a manufacturer.e. Copy of registration certificate of the firm.f. The authorized Dealer/ supplier should have facility of the after salesservice, repairing of the equipment, plant, machinery at the site / shop.g. Certified copy of PAN and income tax clearance certificate of last threeyears issued by Department of Income Tax.h. Documents showing capability to carry out maintenance, repair & spareparts stocking obligations.i. Certified copy of VAT/ Sales Tax/ CST certificate.j. User’s list and photocopies of the purchase order received for the saiditem during the last five years.k. Copy of firm registration certificate.l. Copy of Partnership deed if any along with the general power of attorney.m. Signed terms and conditions.Envelope 2- Financial Details:a. Item-wise rate of the equipment/ instrument should be quoted in the tenderform.b. The rates should be quoted only in Indian currency.c. No rate should be quoted in combination of items.Both the envelopes are to be enclosed in a large envelope addressed to theAssociate Dean, Nagpur Veterinary College, Nagpur 440006 (M.S.) andsubmitted to the Associate Dean, Nagpur Veterinary College, Nagpur 440006(M.S.) on or before 28/03/13 up to 14.00 hrs.Associate Dean,NVC, Nagpur

I/we have read all the terms and conditions (1 to 29) and are acceptable tome/usSignatureName of the Signatory(In Block Letter)AddressNote :-1. The signatory of the declaration above and of the tender must be dulyauthorized executive of the firm or company on whose behalf he mayacting and must indicate his official designation.2. The terms and conditions of tender as laid down above are withoutprejudice to and exclusive of such additional once or such features as maybe indicated in the tender form itself.3. The terms and condition with the signed declaration by the tenderer mustreturned intact with the tender, duly signed by him in envelop B.

T E N D E R F O R M1. Last date of sale of tender : 28/03/13 till 13.00. hrs2. Last date of receiving tender : 28/03/13 till 14.00. hrs3. Date of opening of tender : 28/03/13 till 14.30. hrsToThe Associate Dean,Nagpur Veterinary College,Nagpur 440006Sub : Tender for supply of Equipment / Instruments for the projectSir,In accordance with the advertisement appeared in Newspaper / Web siteand as the terms and conditions of the tender, I/We am/are submitting herewith ourtender quoting there in minimum rates for supply of Equipment / Instruments inthe accompanying schedule.Yours faithfully,Signature of the Tender with dateW I T N E S S1st Signature2nd SignatureName : …………………………… Name : ………………………………Date: ……………………………. Date : ……………………………...Place : ……………………………. Place : ……………………………..Address:……………Address: …………………………..

MAHARASHTRA ANIMAL & FISHERY SCIENCESUNIVERSITY, NAGPURNAGPUR VETERINARY COLLEGE, NAGPUR-440006TERMS & CONDITIONS:1 The Tender is non – transferable and conditional tender will not be accepted.2. No tender shall be considered if the contents are erased, illegible oroverwritten. Any minor corrections should be scored and rewritten under theinitials of the tenderer. As far as possible tender should be without anycorrections.3. The tender notice, tender form and details of terms & conditions, specificationof each item can be downloaded from the University website www.mafsu.in.The tenderer who downloads the tender form from the website should note thatthe downloaded tender form will not be accepted without the cost of the tenderi.e. Rs1000/- ( Rs One Thousand only) in the form of Demand Draft4. The tender should be accompanied with the EMD at the rate of 1% of thevalue of the item quoted by the tenderer. The EMD will have to be depositedin the form of DD/ Bankers Cheque of Nationalized Bank drawn in favour of‘PAO,HQ NVC.Nagpur. . EMD exemption will be given if the validcertificate is enclosed5. The Earnest Money deposited by the tenderer shall remain in the safe custodyof the Associate Dean, NVC,Nagpur until the acceptance of the tender is madeknown to the tenderer and in case, his tender is accepted until the tenderersigns the contract and gives the necessary security deposit. In case ofunsuccessful tenderers, the amount of EMD will be refunded soon after thedecision is finalized, on submission of plain application.6. The intending supplier shall also have to mention the name ofmanufacture/make, model of the article and has to enclose thepamphlets/pictures/information brochures of the appliances for which the ratesare quoted. In the absence of the above, the items offered may not beconsidered. The preference will be given to (a) Manufacturer, (b) AuthorizedDealers of manufacturer or (c) authorized suppliers. Such agencies mustenclose adequate documents to prove their claims. The preference will begiven to the items bearing ISI/ISO 9000 quality control mark for the laboratoryequipments/ instruments.7. All the articles will have to be supplied FOR TVCC, NVC, Nagpur. Thesupplier should note that the rates should be inclusive of VAT, excise duty,octroi, packaging, loading and unloading, forwarding, transportation,installation, insurance etc.

8. The College has adopted two envelop system superscripted thereon as‘ENVELOP 1 : TECHNICAL DETAILS” & “ENVELOP 2 : FINANCIALDETAILS” which should be kept a larger sealed packet / envelope. The largerouter cover should indicate Tender Number, Name of the equipment andopening date on the top of the right hand corner. The technical details inenvelop A will be opened on 28.03.2013 at 14.30 hrs. at first instance. Acompetent committee will evaluate the same. If the technical specifications areas per the tendered specifications, tender will be accepted. Otherwise, in casewhere the technical details (envelop 1) fails to meet the requirements, theFinancial details (envelop 2) will not be opened and the tender will be rejected.At the Second stage, financial details of only technically accepted offers shallbe opened for further evaluation and ranking before awarding the contract.9. The tender form is to be submitted in the two envelopes 1 and 2 and shouldcontain following documents –Envelope 1- Technical details:a. 1% EMD for Rs…………….. in the form of Demand Draft ofNationalized Bank drawn in favour of PAO,HQ NVC.Nagpur (EMDexemption will be given if the valid certificate is enclosed).b. Technical specifications consisting of all technical details along withcommercial terms & conditions.c. Product Literature / leaflets consist of detailed description of goodsessentially technical and performance characteristics.d. Manufacturer’s Authorization Certificate in case the tenderer is quoting asan authorized dealer/ supplier on behalf of a manufacturer.e. Copy of registration certificate of the firm.f. The authorized Dealer/ supplier should have facility of the after salesservice, repairing of the equipment, plant, machinery at the site / shop.g. Certified copy of PAN and income tax clearance certificate of last threeyears issued by Department of Income Tax.h. Documents showing capability to carry out maintenance, repair & spareparts stocking obligations.i. Certified copy of VAT/ Sales Tax/ CST certificate.j. User’s list and photocopies of the purchase order received for the saiditem during the last five years.k. Copy of firm registration certificate.l. Copy of Partnership deed if any along with the general power of attorney.m. Signed terms and conditions.

Envelope 2- Financial Details:a. Item-wise rate of the equipment/ instrument should be quoted in the tenderform.b. The rates should be quoted only in Indian currency.c. No rate should be quoted in combination of items.10. Both the envelopes 1 & 2 are to be enclosed in a larger envelope addressed tothe Associate Dean, Nagpur Veterinary College, Nagpur and submitted to theAssociate Dean, Nagpur Veterinary College, Nagpur on or before 28/03/2013(up to 14.00 hrs). This envelope must bear the words “Tender for supply ofHospital / Laboratory Instruments/ Equipments, etc.”11. The college authority reserves the full rights to open/consider the secondenvelop (2) only if the college authority is satisfied with information containedin envelope (1). The decision of the college authority regarding this will befinal and shall be binding on tenderer.12. The tenders as furnished should remain open and valid for 12 months from thedate of opening the tender.13. Any infringement of the terms and conditions of the contract will make thetenderer liable for cancellation and further earnest money or security depositpaid will be forfeited by the Associate Dean, Nagpur Veterinary College,Nagpur14. Tenderer will not be allowed to withdraw his tender after opening the samewithout forfeiting his earnest money deposited.15. The equipments must be of the best quality, sound and or as per the givendetailed specification and subject to the approval of the Associate Dean,Nagpur Veterinary College, Nagpur16. The tender will be opened on 28.03.2013 at 14.30 hrs. in the NagpurVeterinary College, Nagpur in presence of tenderer or his representative. Ifrequired, at the time of opening the tender, the Associate Dean or TenderOpening Committee can ask for specific documents which will have to becalled for / provided at that time.17. Successful tenderer will have to furnish security deposit to the extent of 3%of total cost of the items accepted by the College authority as offered in thetender either in cash or through demand draft drawn on any nationalized bankpayable at Nagpur in favor of the “PAO,HQ NVC.Nagpur”. The successfultenderer should have to pay the security deposit immediately on receipt oforder, failing which his earnest money deposit is liable to be forfeited and heshall cease to be a successful tenderer. Thereafter, the Associate Dean shall befree to enter into contract with any other tenderer.

18. The security deposit of the tenderer shall be returned to the tenderer after 12months or expiry of warrantee whichever is less from the date of supply ontheir furnishing the usual demand certificate, subject to the clearance of alloutstanding dues, issues or points of dispute to the satisfaction of the AssociateDean. No interest will be given on the amount for such period.19. The goods should be dispatched at suppliers risk; however, the supplier will beresponsible until the entire items are supplied in good condition at thedestination.20. It is within the discretion of the concerned college/ University authorities toincrease or decrease the quantity to be purchased and/ or to relax the conditionsin exceptional circumstances.21. Even though the tender is technically accepted but after receiving of the saidequipment, if it is found that the technical specifications given in the tenderdocument do not match with supplied equipment, the Associate Dean reservesthe right to reject the purchase order and the purchase order will be given to thenext tenderer after negotiations.22. Installation and demonstration of equipments with satisfactory performanceshould be given before the payment is made to the supplier. Payment will bemade after satisfactory report is received from the concerned Indenter /Scientist / Officer In charge.23. Undersigned reserves right to accept or reject supplies in full or in part whichdo not strictly stick up to the specifications or to accept the materials suppliedwith slight variations in specifications or with a condition that the ratesaccepted shall be reduced at such rates as the competent authority of theCollege may deem fit, looking to variations and such rates shall be binding onthe tenderer.24. College authority reserves the right to accept or reject - higher version ofequipment/instrument etc. or any other items under the same terms andconditions quoted by tenderer.25. The credit bill/ invoice should be presented in triplicate in the name of‘Associate Dean, Nagpur Veterinary College, Nagpur’ up on receiving thesupply order. The College authority will not be liable for any delay in paymentof bill(s). Payment for goods supplied will be effected through Cheque only.26. The right to accept or reject whole or part of the tender without assigning anyreason thereof is reserved by the undersigned.27. Every page of the tender and terms and condition must be signed by thetenderer.28. It is within the discretion of the Associate Dean, Nagpur Veterinary College,Nagpur to increase or decrease the quantity of purchase.

29. All documents of envelop 01 should be attested by Gazetted or equivalentauthorities.Associate DeanNVC, NagpurI/we have read all the terms and conditions (1 to 29) and are acceptable tome/usSignatureName of the Signatory(In Block Letter)Address

To,The Associate DeanNagpur Veterinary CollegeNagpurSub:- Submission of tender for supply of Hospital / laboratory equipmentSir,I am pleased to submit the rates for Hospital / laboratory equipments as per youradvertisement in ………………… (News paper) Dated …………… as belowLIST OF HOSPITAL / LABORATORY INSTRUMENTS / EQUIPMENTSTO BE PURCHASEDOffice of the Associate Dean, Nagpur Veterinary College, Nagpur wishes topurchase the following EquipmentsSr.No.Name ofitemSpecificationQuantityrequiredRatesinclusive of alltaxes1 2 34 51 Hemodialysismachine1. The hemodialysis unit shall be microprocessorcontrol and providing the following features1.1 Acetate & bicarbonate dialysis1.2 Volumetric ultrafiltration1.3 Sodium, UF & Bicarbonate profiling2. It should be latest Microprocessor basedTechnology, technology should not be olderthan 5 years3. Keyboard function key should be provided3.1 LCD display for dialysis data display3.2 Its brightness is adjustable adaptively toillumination of the environment.One

4. Self test during treatment4.1 The equipment should perform a self testduring treatment automatically in fixedtime slot not less than 10 min to ensure theintegrity of close system.5. Heparin pump5.1 Infusion rate : 0-10 ml/hr in 1ml/hrincrement.5.2 Accuracy : ±5%5.3 Counter pressure:5.4 Stop time: Heparinization stop time(before end of treatment) 0 – 9 hr 59 minuser adjustable in 1 min increment5.5 Accumulated heparin volume: 0 to 999.9ml6. Pressure monitoring & alarm6.1 Venous pressure monitoring range: -700 to+700mmhg Accuracy : ±5 mmhg6.2 Venous pressure alarm adjustable high &low alarm limit. Alarm limit should spreadand be reset automatically on adjustmentof blood flow.6.3 Arterial pressure monitoring Range : -700to +700 mmhg Accuracy ±5mmhg6.4 Arterial pressure alarm adjustable high &low alarm limit. Alarm limit should spreadand be reset automatically on adjustmentof blood flow.7. Air detection7.1 Method: Ultrasonic detection7.2 Drip chamber size: 22 mm diameter7.3 Sensitivity – Bubbles >µl will be trappedby the drip chamber.8. Dialysis fluid preparation and monitoring8.1 It should have separate conductivitymonitoring for Acid Concentration,Bicarbonate concentration, Total dialysate

8.2 Flow rate: 300-700ml/min (by step of20ml/min.)8.3 Concentration stand by mode to saveDilysis fluid.9. Blood leakage detectionMethod: Infrared light detector – Alarm willbe given forless than or more than 0.3ml ofblood, Haematocrit 32%, per min at700ml/min dialysis fluid flow.10. Blood flow control10.1 Flow rate, Double needle: 0 and 20 to500ml/min – Should be also possible to setblood flow in 5, 10, 15ml/min10.2 Flow rate, single needle: 0 and 20 to500 ml/min, pressure controlled.11. Temperature control and alarmsAdjustable 33 to 40 degrees Celcius. Accuracyis valid only if dialysis fluid temperature isgreater or equal to ambient temperature.12. Conductivity control and alarmThe dialysate conductivity should be adjustedby setting the Sodium concentration.12.1 For acetate dialysis, sodiumconcentration should be adjustable from130 to 160mmol/l in 1mmol/L increment.12.2 For bicarbonate dialysis, sodiumconcentration should be adjustable from130 to 160mmol/l in and bicarbonateconcentration should be adjustable of20 to40mmol/L.12.3 Conductivity measurement.12.4 Range: 13 to 16 mS/cm12.5 Accuracy : ±0.2mS/cm13. It should be capable of on-line preparation ofbicarbonate dialysis fluid.14. Ultrapure Dialysate Fluid Filter14.1 The equipment should have a hygienic

connection for the ultrapure Dialysate fluidfilter.14.2 The fluid filter should have anendotoxin retention capacity not less than10 614.3 Purification of water for dialysisPreparation of Ultrapure dialysis fluid14.4 High bacterial and endotoxin retentioncapabilities14.5 Convenient disinfection14.6 Extended life time (100 disinfectioncycle or months).15. Dialysis dose measurement ( Online Kt/VMonitoring)15.1 Built – in device for measurement andmonitor of effective urea clearance (K),dialysis dose (Kt/V), automatically duringtreatment15.2 The measurement of effective ureaclearance (K), Dialysis dose (Kt/V) shallbe performed in non – invasive, real timemode without additional disposablerequired during treatment.15.3 Measuring accuracyClearance measurement accuracy: ± 5 % (standard deviation)Kt/V determination accuracy: ± 9% (Standard deviation)15.4 Data measurement list.16. Battery BackupThe equipment shall be able to operate around30 min for the extracorporeal circuit.17. Disinfection and cleaning17.1 Both chemical and heat disinfectionshould be performed at 930 C.17.2 Sodium hypochlorite, dilutedformaldehyde or per – acetic acid must be

used as disinfectant.17.3 Various programmable cleanising cycleshould be provided with different phaseand timinig in accordance with differentdisinfectant.17.4 One touch fully automatic operationincluding: pre rinse, chemical intake forcombined disinfection and declarification,post chemical mandatory rinse andautomatic power off, without extra enduser handling during the wholedisinfection process.17.5 Chemical disinfection history screen.18. Rinse/ Drain program18.1 Automatic start or manual18.2 At the end of program there should beno fluid in the hydraulics preventinggrowth of bacteria or endotoxins.19. Blood pressure monitor19.1 Intgrated real time blood pressure19.2 Automatic – Interval measurements (5– 60min)19.3 Data of measurements list.2 DigitalComputedRadiographyA. Specification of Digitizer1. Reading speed: More than 44Cassette/hr for 14” X17”2. High resolution Cassette imageacquisition (12 Pixel / mm or higherfor general radiology)3. 16 Bit Gray scale in Acquisition4. Cassette sizes: 8”X10, 10”X12”,14”X17”5. Matrix sizes: 8”X10” – 2200X2800,10”X12” – 2800X3400,14”X17”4200X49006. Optional: Cassette size:14”X34” forwhole spine / whole legOne

3 ElectrolyteAnalyzerB. Software : on main Work station1. DICOM Printer2. Magnification3. Annotation4. Whole leg whole spine if LLIneeded5. CD writing6. DICOM send7. True size printing8. Multiple image on simgle screen9. Windows level/ widthadjustment cropping10. Web viewer 4 License Bundle tolink over existing LANImage specification: For 57001. Recording method: dry leaser/thermal2. online compatible for8“×10”,10×12,11”×14”& 14”×17”3. throughput of14”×17” sheet:45sheet/ hour4. printing of each film at spatial resolution oftrue 325DPI or higher5. Grey scale resolution: 14 bits or higher6. Single online with flexibility of any film sizesto be used.7. Must have automatic film density correction8. Daylight film loading9. DICOM input10. possible to connect with DICOM outputsystem like DR,MRI,CTScan color Doppler, Ultrasound, Cath, Lab,Mammography & PACA,etc1. It should have measured parameters Na, K2. It should be based on ‘Ion Selective Electrode’technology3. All the necessary reagents should be in onesingle pack including waste.4. It should be able to measure all the parameterswith one single aspiration of sample.5. The sample volume shoud not be more than100 micro-liter.One

6. The analysis time should not be more than oneminute.7. The system should have inbuilt printer.8. The system should have a simple Yes or Noinstruction guide for user convenience.9. It should have 125 patient data storage.4 AnimalBloodCounter1. Instrument capable of reporting CBC + 3 partof DIFF + Eosinophils2. Facility of comprehensive data management3. User Interface: through – Integrated colortouch screen4. Through put :- 50 samples/hour5. Specimen volume : 10µL6. Power requirements: Power supply from 100Vto 240 V (±10%) frequency – 50Hz to 60Hz,Power consumption Maximum 110VA7. Methods & technologies• RBC/PLT detection principles:Impedance method with Ruby diameter50µm, duplicate/Triplicate counting foreach specimen.• HGB measurement: methodphotometry wavelength 550nm• HCT method numeric integration• WBC measurement: methodimpedance, ruby diameter 80µm withLym, Mono, Granulo, Eosino,Differentiation, Method impedance +specific Lyse action.• MCV,MCH, MCHC, RDW:calculation.8. Reagent: Reagent pack (Cyanide free)9. Reporting feature: should report at least 8animal species* (* dog, cat, horse, rat, mouse,rabbit, pig and monkey)One

• 8 or 18 parameter• CBC + 3 DIFF + Eosinophils• User friendly interface with rapidaccess to all menus and virtualkeyboard• Easy selection of animal species.• Multi – connection capacity ( networkand peripherals)• Flexible data exchange10. Comprehensive quality control pogram• 3 simultaneous activated blood controllevels.• Levey – Jennings graphics: XBmanagement• Upload / Download controlinformation: easy interpretation11. Operational specification• Control all the parameters from themain screen• Access to detailed results (normalranges and curves)• 1000 results capacity• Unlimited archiving• Customized reporting format• Easy selection of animal species• 8 animal species must be available• 18 parameters for dog, cat, horse• 8 parameters for rabbit, rat, pig, mouseand monkey• Automatic system monitoringo Real time instrument statuso Automatic reagent test countdowno Automatic daily maintenanceo Complete traceability12. Hardware specification

5 Hydraulicoperationtable forSmallAnimals• 7 connection ports – RS322 (2), USB(3), PS2 (1), RJ45(1) providing fullconnectivity• Instrument should not have anycompressor for hydraulics.• Facility USB connection for archivingresults and QC targets.• OUTPUT througho RS232C outputo External printero External barcode readero External keyboardo Ethernet13. Parameters and performance data• 8 parameters: rabbit, pig, rat, mouseand monkeyWBC, RBC, PLT, HGB, HCT, MCV,MCH, MCHC• 18 parameters: dog, cat and horse• WBC, RBC, PLT, HGB, HCT, MCV,MCH, MCHC, LYM# & LYM%,MPV, MON# & MONO%, GRA# &GRA%, EOS# & EOS%, RDW.Certifications:EN61326:1997/A1:1998/A2:2001/A3:22003,IEC61010-1:2001, IEC61010-2-081:2001/A1:2003,UL61010-1:2004, C22.2N 0 61010 -1 :2004,cTUVusmarksizes 160 x 60cm., S.S. top divided into two sectionsfor Flexa & Reflex position and can be revolvedthrough 360 degree and can be locked at any desiredposition with drain out hole, chromes plated tie rodwith sliding hook on one side 0cm. below the surfaceHydraulic pump in a cost iron base with foot leveradjustment at any height between 90cm x 105cm.Table is mounted on castors with screw flanges tokeep it fixed. Top of the table can be tilted slowly forOne

6 OperationTheatreCeilingMountedLight7 Defibrillatorremoving the animal after operation.• 20’ Dia Dome• Fitted with Imported Halogen Bulbs 24 v –150 w• Lux 50,000 + 10 % at 90 Cms• Heavy Duty step down transformer made formCRGO Core with H.P.P.S.• Sterilizable Central handle• Hear absorbing & colour correcting specialfilter glasses• Provided with Standby bulbDetails as per Catalogue attachedGeneral Dimensio 260X280X250mmspecification nsWeight 100 discharge of 300joules with fully chargednew batteryUserinterfaceDisplay, keys, alarms,text & voiceMemory 24 EventsDisplay Type Monochrome STN LCD5.7” (320X240 pixels)InformationOperation information,ECG traces,Heart rate indicator,alarms & battery statusUser gainsettingFrequencyresponseECG out8 level setting:X0.25,0.5,0.75,1.0,1.5,2.0,3.0,&4.00.5-35Hz1V/1mV (depends of gainOneOne

defibrillation waveformImpedanceChargetimeAED MODE Energy@ 50ΩWaveformPresentenergyManualmodeAEDmodeselectcontrolsChargereadyindicationOperationcommandPatientImpedanceManualanalysisEnergyCommandssetting)Current control biphasicwaveformCompensated, range25-200 Ohm< 10sec for 300J withbattery fully chargedAdult: 200J – 300JCurrent control biphasicwaveformLo= 200J, Hi= 300J(Programmable patternsfor initial 3 shocks)Momentary AEDON/OFF key on frontpanel to enter/ exitAED modeDisplay / VoicecommandVisual (Text) andvoice instruction ofAED operation25 – 200 ohmsMomentry ANALSEkey on front panel withblinking LEDRange 2 – 300J(2,3,5,7,10,20,30,50,70,100,150,200,250,300J)sEnergy select & chargebutton in the front panel,

ECGmonitoringOperating modeIndicatorsBandwidthCMRRInputimpedanceInputshock keys on the paddlesdetachable type externalpaddle assembly withcoiled retractable highvoltage cable. Adult andpediatric paddlesintegrated into samehandle.ECG “R” wavesynchro or asynchromodeBattery and mainLED indicators0.5-35Hz>90db>2.5MohmPatient cable 3 leads(I,II,III) standard25±1mm/secSweepspeedHR range 10 – 300bpm (~2%),digital readout on thedisplayAlarm Hr max settable 300bpm;HR min 20bpmPrinter Recorder 50mmRecordin Thermal array recordingg typePapersize50mmX20 mts; printwidth: 40mmPaper 25mm/secspeedPrintmode6 sec delayed ECG

Standards &safetyEnvironmentalStandardaccessoriesEventrecordingPrintannotationsStandardStores and prints upto 24events post critical eventdata up to 24 eventTime, date, heart rate,HR limits, event maker,ECG parameters, selected& delivered energy,patient impedance andhospital nameClass 1 with internalpower supply as per IEC60601-1, ECG input –Type CF, paddle input–type BFOperational – 0-40 0 CTemperatureStorage 10 0 - 70 0 CRelative 30-95%humidityECG 3 lead typepatientmonitoring cableEarth 1 nocableElectrode 1 nopastePaper roll 1 noDisposab 1 pktle ECGelectrodePowercordUsermanualAccessory case1 no1 no1 no

8 Multi paramonitorGeneralECG/respirationDisposableelectrodesDisplay1 pairColour TFTSize 10.4”Resolution 640X480 pixelTrend 90 daysPower 110-230 VAC 50/60HzsupplyInput poser 115 VABattery 12V/4.0AH sealed Lead–AcidBatteryoperationMore than 1.5 hours withfully charged new batteryWeight 7.95 KgsHeart rate 20-254 bpm ±1bpmrangeLeadselectionI, II, III(3 lead mode)I, II, III, V, aVR, aVL,aVF (5 lead mode)0.8~+ 0.8mVST segmentrangeSweep speed 12.5/25/50 mm/secGain 4mV, 2mV, 1mV, 0.5mV,selection autoRespiration Thoracic impedancemethodRespiration 5~99 brpmrate rangeAccuracy ± 2 brpmNIBP Method OscilliometricParameters Sys/ Dias/ MAPOperating Manual/ Auto/ statmodeOne

SpO 2TemperatureRecorderOptionalStandardaccessoriesScale mmHg/ KpaCuff Adult/ pediatricpressure 35~254 mmHg Neonaterange 30~135 mmHgRepeat 1~10, 15,30,60,90,120cycles minutesSaturation 0-100%rangeAccuracy ± 2% (90-100%), ±3%(50~89%)Pulse rate 30 ~250 bpmrangePulse rate ± 1% (30~100 bpm)accuracyNo of Parameters T1, T2, ∆TchannelsProbe type YSI series 400Accuracy ±0.1 0 CRange 0-50 0 CType Built in three channelthermal arrayPrint mod Text/ waveformsResolution 400dpi vertical, 800dpihorizontalDual IBPCO2CardiacoutputMulti gasmonitoringECG patientcableSpo2 adultsensor probe1 No.1 No.

9 ROPLANTNIBP cuff 1 setPower cord 1 No.Temperature 1 No.probe1. Raw water pump ( cum cleaning pump)Quantity: 01no.Capacity: 1.9m 3 /hr@3kg/cm 2Type: Horizontal multistageMOC: CIMake: Kirloskar2. Pressure sand filter & activated Carbon ( DuelMedia)Quantity: 01no.Vessel MOC: FRPSize: 10"dia X 44" HeightMedia: filtering sand and suporting pebblesFlow: 1.9m 3 /hrValves and piping: 25 nb MPV and PCV pipingMake: Aventura/ hitech3. Micron cartridge filterQuantity: 1 setCartridge: spun PPMicron rating: 5 micronFlow: 1.9 m 3 /hr4. Flow pressure pumpQuantity: 01noCapacity: 1.9m 3 /hr@12kg/cm 2Type: Vertical multistageMOC: Stainless steelMake: Nan Pump/ Grundfoss or CRIMotor: 3 Phase, 415 V5. RO membranesQuantity: 01noType: High rejection, TFCMake: Burton-4040/hitechSize: 4"diaX40"longTotal product flow: 1.0m 3 /hrOne

10 AUTOMATICSYRINGEINFUSERPUMPand fluidwarmerFeed flow:1.9m 3 /hrRecovery: 50-60%Average temprature:25 deg. C6. RO pressure tubesQuantity: 4 no.MOC: FRPSize: Suitable for 1 no. 4040 membranes7. InstrumentationPressure Gauge: 02 no. (RO feed/ reject)Rotameters: 02 no. (Permeate/ Reject)Polycarbonate, variable area typeRotameterConductivity sensor: 1 no. (RO permeate)Low pressure switch: 1 no. HPP suctionLevel switches: 1 setControl panel: 01 no. with required control logic &TDS display.Water Storage Tank Plastic make ISI marks of 1000liters capacity ( Two)END WATER QUALITYTDS< 50 ppmpH 7.0+/- 0.2TurbidityNilColorNilRO PLANT OPERATING CONDITIONSr. No. Parameter value1 Feed flow rate 1000LPH2 Product Flow Rate 100 LPH3 Reject Flow Rate 400-500 LPH4 Recovery 40-45%Should be for Veterinary use for high rate druginfusions and nutritionalsShould accept all standard syringe brandsShould accepts standard syringe sizes from 20,50,100 mlShould automatically recognizes syringe size and canbe set for different brandsShould have audible and visible alarms for near end,Four

11 VeterinaryPulseoxymetercomplete occlusion and low batteryInfusion rate from 10 ml/hr to 1200 ml/hrProgrammableShould calculate by dosage or flowEasy set upAccuracy ± 20 Sec.Should have battery backup for minimum 6 hrsLightweightAll essential Accessories like pole mount etc.Preferred feature: Should calculate in: ml/hr, mg/hr,µg/hr, mg/kg/hr, mg/kg/min, µg/kg/hr, µg/kg/minPatientFluid WarmerShould be portable and lightweight with hanging beltto hang on IV poleCompatible with standard IV setShould allow fluid or blood to be warmed to theappropriate range of 95-105º FahrenheitShould be able to measure temperature second tosecondAs the fluid or blood flows through the tubing, thereshould not be any heat loss due to ambient airShould warm and ready to use within ten minutes(from a cold start)Should have temperature overheating protectionTemperature should be displayed in 0C and oFShould accommodate a slow drip to a bolusShould have color coded signals for warming andover heatingAnd all essential AccessoriesShould be Veterinary specific for anesthesia andsurgical monitoringShould be portable with 3 or more hours battery backupShould be supplied with lingual spo2 ProbeShould be provided with mobile stand with pole,spider base and mounting plates for safety andmobility between examining room and operationtheaterShould have veterinary specific leads for CO2,SPO2, ECG and temperature.24 hr data and event historyOne

High and low alarm setting for all parameterShould have PC connectivity with serial or USBincluding necessary software.Oxygen saturation range(SpO2) : 0-100Pulse rate range: 18-450Co2 range: 0 to >75mm HgCo2 response time: 250msRespiration rate range : 1 to 60 breaths per minute12 Nebulizer Type ofPistonCompressorPressure Max 2.5 barAir Flow Min 8 LPMNoise at 155 dBAmeterOperating60 min ON 60 min OFFtimesParticle sizes 0.5-5 micronsSize344mm x 189mm x 120mm(215-240vAc; 50-60 Hz) (110-Power Supply130v Ac, 50-60 Hz)Power90 watt maximumConsumption13 VeterinaryLaryngoscopesWeight approx 1.9 kg• Blade sets available with fibre optic lightsource on either sideo Right-handers – those who intubatewith the right handoLeft handers those who intubate withthe left hand• Sealed LED light source (no more bulbchanges, waterproof)• Magnetic light switch (no mechanical movingparts)• Broad range of blade lengths available, from75mm (3″) to 350 mm (14″)• Extra long blades (sold separately) 300 mm(12″) and 350 mm (14″) for very large dogs,sheep, goats, small pigs, marine mammals,and zoo animals• Low power consumption gives improvedbattery life• 5-piece blade set comes in a convenient,TwoOne

leather presentation case with blades lengthsranging from 75mm to 250mm14 Milk Measured Measuring Accuracyanalyzer components rangeFAT 0.01% TO ±0.07%20.00%SNF 3% TO 40% ±0.12%DENSITY 1000 TO 1150 ±0.3 Kg/mKg/mPROTEIN 2.00% TO ±0.1%7.00%LACTOSE 0.01% TO ±0.1%20.00%ADDED 0% TO 70% ±3%WATERFREEZING -0.4 0 C TO - ±0.005 CPOINT 0.7 0 CSAMPLE 1 0 C TO 40 0 C ±1 0 CTEMPRATUREpH 0 TO 14 ±0.05CONDUCTIVITYFrom 2 to 14(mS/cm)0.115 Suction Cabinet made of steel with powder coated.Trolley 1/4 HP heavy duty motor.Oil immersed vacuum pump.Tow wide mouth glass bottles of approx. 1660 mleach.Synthetic air tight rubber lids.Overflow cut-off device.Non-collapsible PVC tubing16 Water Bed 200 cm X 90 cm sizeWith Nozzle & Plug with water filling accessories17 Animal Floor mounted, stainless steel completeholding/RaisedFour unit assemblyOneOneFourFour

floorkennelsTop row two 48”X36” kennelsBottom row two 48”X36” kennelsDouble doors, complete stainless steel frame roundedcorners, with urine retaining lip, front to rear support bar,stray – heavy secure catch, heavy hinge rods, removablecenter divider bar on double door kennels, coated grillfloor18 Endoscope Endoscope model GIF-E3 Korl storz-OneAttachment Suction unit and monitor19 Osmometer 29.0cm × 40.6cm × 31.0cm (11.4" × 16.0" × 12.2"), Lessthan 1 mOsm/kg H2O per month, Voltage - 100 to 240 VAC(50/60 Hz) Power Consumption - 80 Watts, 30 to 80%relative humidity, (non-condensing), ±3 mOsm/kg between0 and 300 mOsm/kg H2O; Less than ±1.% above 300mOsm/kg H2O, 10.0kg (22.0 lbs), 0 to 2000 mOsm/kgH2O, ±3 mOsm/kg H2O (1 S.D.) between 0 and 400mOsm/kg H2O; ±0.75% (1 S.D.) between 400 and 2000mOsm/kg H2O, 1 mOsm/kg H2OOne20 HandRefractometerSize -160mm, Weight -240g, Type - Traditional ClinicalRefractometer, Triple scale - Urine Specific Gravity, TotalSerum Protein, Refractive Index, Serum Protein -0 - 12g/dl,Specific Gravity - 1.000 - 1.050sg, Refractive Index -1.330RI -1.360RI, Accuracy (SG) - ±0.005sg, Accuracy (SP) -±0.2g/dl,Accuracy (RI) -±0.0005 RI, Body - Heavy-duty lightweightaluminum constructionOneNote: Rates should be quoted in this form only, if the rates are not quoted in thisform the tender will be rejected, The tenders are to be submitted in two-bid systemi.e. in Envelop No.1 the EMD and other relevant documents and Envelope No.2The tender documents duly filled in.

The offer total cost for Rs. ……………………………(In words. Rs……………………………………………………………..)I have read all the terms and conditions mentioned in your tender enclosed formnumber 1 to 29 and these are conditions are acceptable to me.If there is any increase in taxes or taxes imposed by any authority (Central & Stategovernment, local authorities etc.) or any liability I agree to pay it and NagpurVeterinary college will not be responsible for such payment or liability.Date :-SignatureNameSeal of the company