Product Manual MODEL VPR100 Series

Figure 7. continuedThe block should have the Numbers1-4on it. (shown right)For the Dynamic output, connect the wiresto Terminals 3 & 4:• Terminal 3 – Positive output• Terminal 4 – Negative outputFigure 8. Block ConnectionsAfter wiring terminal blocks, re-insert them into the SC200 unit.Replace the main panel, use care when replacing the panel to preventdamage to the internal wiring harnesses.WarrantyIf any PRO product should ever fail, we will repair or replace it at no charge, aslong as the product was not subjected to misuse, natural disasters, improperinstallation or modification which caused the defect.CONTACT INFORMATION:Connection Technology Center, Inc (CTC)7939 Rae Blvd.Victor, NY 145641-800-999-5290 (US & Canada) 1-585-924-5900 (International)sales@ctconline.com – www.ctconline.comMNX10023 / Rev C4-11-08 9