1st YEAR: 1st SEMESTER (JULY-DEC) - CIT, Kokrajhar...

CENTRAL INSTITUTE OF TECHNOLOGY(Centrally Funded Institute Under the Ministry of HRD, Govt. of India)Bodoland Territorial Council, Kokrajhar, Assam-783370(B.Tech Syllabus in Instrumentation Engineering)cold cathode and hot cathode types – Testing and calibration of pressure gauges – Dead weighttester.Temperature MeasurementDefinitions and standards – Primary and Secondary fixed points – Calibration of thermometer,different types of filled in system thermometer – Sources of errors in filled in systems and theircompensation – Bimetallic thermometers – Electrical methods of temperature measurement –Signal conditioning of industrial RTDs and their characteristics – three lead and four lead RTDs.Thermocouples and PyrometersThermocouples – Laws of thermocouple – Fabrication of industrial thermocouples – Signalconditioning of thermocouples output – Thermal block reference functions – Commercialcircuits for cold junction compensation – Response of thermocouple – special techniques formeasuring high temperature using thermocouples – Radiation methods of temperaturemeasurement – Radiation fundamentals – Total radiation & selective radiation pyrometers –Optical pyrometer – Two colour radiation pyrometers.TEXT BOOKS1. E.O. Doebelin, ‘Measurement Systems – Application and Design’, Tata McGraw Hillpublishing company, 2003.2. R.K. Jain, ‘Mechanical and Industrial Measurements’, Khanna Publishers, New Delhi,1999.REFERENCE BOOKS1. D. Patranabis, ‘Principles of Industrial Instrumentation’, Tata McGraw Hill PublishingCompany Ltd, 1996.2. A.K. Sawhney and P. Sawhney, ‘A Course on Mechanical Measurements,Instrumentation and Control’, Dhanpath Rai and Co, 2004.3. B.C. Nakra & K.K.Chaudary, ‘Instrumentation Measurement & Analysis’, Tata McGrawHill Publishing Ltd, 2004.4. S.K. Singh, ‘Industrial Instrumentation and Control’, Tata McGraw Hill, 2003.5. D.P. Eckman’, Industrial Instrumentation’, Wiley Eastern Ltd.,Page 61 of 75