CENTRAL INSTITUTE OF TECHNOLOGY ... - CIT, Kokrajhar...

Modular Luggage rack of appropriate size. The unit will be fabricated out of 25mm thick Prelaminatedparticle board with approved laminate. All exposed edges to be finished with matchingedge banding to avoid any kind of seepage of moisture or water during floor cleaning andmaintenance. All hardware to be Hettich/Haffle or equivalent makes. Unit has to rest on four 12mmhigh PVC leg recessed from the edges and having rubber capping. The exact design of the unit will beprovided by the Institute; hence you are requested to submit item designs also.15. Dressing Table:Modular Dressing Table of appropriate size. Back panel, Outer drawer front panel & mirror backpanel are 18mm thick MDF panels, remaining all panels are 18mm thick laminated MDF panel with0.8mm thick lapping on all edges. Mirror is 5 to 6mm thick. Mirror frame are 18mm thick both sidelaminated for fixing of mirror proper grove is required which is made by CNC machine. The highquality hardware used like Roller slides, Hinges, Minifix, wooden dowels is of make Hettich.FINISH: 18mm thick or 25mm thick laminated MDF Panels. The exact design of the unit will beprovided by the Institute; hence you are requested to submit item designs also.16. Center Table:Modular Center Table of appropriate size. Supply and fixing of centre table having top will be 25mmthick particle board with 0.7mm thick laminate on top and balancer inside. The under structure will be18mm thick pre laminated board. All edges will be covered by 2mm thick PVC with imported hotmelt glue at 180c by CNC Machine. All hardware to be Hettich/Haffle or equivalent makes. Theexact design of the unit will be provided by the Institute; hence you are requested to submit itemdesigns also.17. Dining Table:Modular Dining Table of appropriate size. Supply and fixing the Dinning Table having 36mm thickpost formed top. Post formed top will be with 0.7mm thick flexi laminate. Below of the table top willbe covered by white balancer. Under structure will be 18mm thick pre laminated board. All edges arecovered by 2mm PVC with imported hot melt glue at 180c by CNC machine. All hardware to beHettich/Haffle or equivalent makes. The exact design of the unit will be provided by the Institute;hence you are requested to submit item designs also.18. Dining Chair:The Dining chairs will have removable PVC cushion seat. Welded construction with combination of16mm & 8 mm MS round pipe. Welded assembly with plastic bush at bottom.26